If this is a clock signal, you can AC couple the LVPECL signal and either parallel terminate to the appropriate VTT or use a thevenin termination with the thevenin voltage set to the appropriate VTT for SSTL2/HSTL. Thanks, Vinu Viral wrote: >Hello!! All, > >Can any one pls give me some help as how to convert >an LVPECL signal to STTL_2 and LVPECL to HSTL_I >signal levels. > >Thanks and Regards, >Viral >------------------------------------------------------------------ >To unsubscribe from si-list: >si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > >or to administer your membership from a web page, go to: >//www.freelists.org/webpage/si-list > >For help: >si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > >List archives are viewable at: > //www.freelists.org/archives/si-list >or at our remote archives: > http://groups.yahoo.com/group/si-list/messages >Old (prior to June 6, 2001) list archives are viewable at: > http://www.qsl.net/wb6tpu > > > > > ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu