[SI-LIST] Re: LVPECL to SSTL and LVPECL to HSTL

  • From: John Lantz <lantz02@xxxxxxxxx>
  • To: si-list@xxxxxxxxxxxxx
  • Date: Tue, 12 Aug 2003 06:12:09 -0700 (PDT)

If you already have a flash device on the board you
may be able to increase the flash size and add some
logic (CPLD) to handle the programming.  I have done
this on a design which had a microprocessor and a
small CPLD that was already required for the processor
to boot.  Therefore in my design the flash and CPLD
were already there so I just saved the price of the
PROM with the only cost adder being the price to step
up the size of the flash.  We did it initially for
board real estate savings.

--- Chze Seong Quah <CSQUAH@xxxxxxxxxx> wrote:
> 
> 
> use the altera Stratix FPGA to convert. It is cheap
> and easy, but =
> disadvantage is that it need to be program by
> eprom.=20
> 
> -----Original Message-----
> From: Viral [mailto:viral@xxxxxxxxxxxxxxx]
> Sent: Tuesday, August 12, 2003 1:10 PM
> To: Si-List
> Subject: [SI-LIST] LVPECL to SSTL and LVPECL to HSTL
> 
> 
> Hello!! All,
> 
> Can any one pls give me some help as how to convert
> an LVPECL signal to STTL_2 and LVPECL to HSTL_I
> signal levels.
> 
> Thanks and Regards,
> Viral
>
------------------------------------------------------------------
> To unsubscribe from si-list:
> si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in
> the Subject field
> 
> or to administer your membership from a web page, go
> to:
> //www.freelists.org/webpage/si-list
> 
> For help:
> si-list-request@xxxxxxxxxxxxx with 'help' in the
> Subject field
> 
> List archives are viewable at:    =20
>               //www.freelists.org/archives/si-list
> or at our remote archives:
>               http://groups.yahoo.com/group/si-list/messages=20
> Old (prior to June 6, 2001) list archives are
> viewable at:
>               http://www.qsl.net/wb6tpu
>  =20
>
------------------------------------------------------------------
> To unsubscribe from si-list:
> si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in
> the Subject field
> 
> or to administer your membership from a web page, go
> to:
> //www.freelists.org/webpage/si-list
> 
> For help:
> si-list-request@xxxxxxxxxxxxx with 'help' in the
> Subject field
> 
> List archives are viewable at:     
>               //www.freelists.org/archives/si-list
> or at our remote archives:
>               http://groups.yahoo.com/group/si-list/messages 
> Old (prior to June 6, 2001) list archives are
> viewable at:
>               http://www.qsl.net/wb6tpu
>   
> 


__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                //www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu
  

Other related posts: