use the altera Stratix FPGA to convert. It is cheap and easy, but = disadvantage is that it need to be program by eprom.=20 -----Original Message----- From: Viral [mailto:viral@xxxxxxxxxxxxxxx] Sent: Tuesday, August 12, 2003 1:10 PM To: Si-List Subject: [SI-LIST] LVPECL to SSTL and LVPECL to HSTL Hello!! All, Can any one pls give me some help as how to convert an LVPECL signal to STTL_2 and LVPECL to HSTL_I signal levels. Thanks and Regards, Viral ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: =20 //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages=20 Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu =20 ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu