Dear all Recently, in our product, there is some problem in our product. The serial signal, such as GE and PCI-E, has error bits. We have found out the reason: 1.The serial signal has crosstalk. 2.The clock signal to PLL has crosstalk. 3.The analog power of the PLL or the serial signal driver has large power noise. I guess the basic reason is that the jitter of clock. Could anybody explain to me how the clock signal is embedded to and deembedded from the serial signal? Best Regards Zhangkun 2006.4.5 ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List FAQ wiki page is located at: http://si-list.org/wiki/wiki.pl?Si-List_FAQ List technical documents are available at: http://www.si-list.org List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu