[SI-LIST] Re: Eye diagram measurement
- From: "Jim Antonellis" <janton@xxxxxxxxxxxxx>
- To: <scott@xxxxxxxxxxxxx>, <edpc108@xxxxxxxxx>
- Date: Wed, 6 Apr 2005 11:14:57 -0400
Hi Scott, Jaaprakash,
I looked into this a while back, and I thought using the HSPICE
.MEASURE construct you did not have the ability to make multiple
bit cell measurements. Could you please share the .MEASURE syntax
that would make this possible as I had to resort to a post-proc
spreadsheet last time I did it.... and would greatfully appreciate
the "trick".
Thx,
Jim
-
Jim Antonellis janton@xxxxxxxxxxxxx
Sandburst Corp www.sandburst.com
Office: 978.689.1669
Cell: 978.618.4745
This message and any attachments are Confidential and may be Legally
Privileged. It is intended solely for the addressee. If you are not
the intended recipient, please delete this message from your system
and notify us immediately. Any dis-closure, copying, distribution or
action taken or omitted to be taken by an unintended recipient in
reliance on this message is prohibited and may be unlawful.
-----Original Message-----
From: si-list-bounce@xxxxxxxxxxxxx
[mailto:si-list-bounce@xxxxxxxxxxxxx]On Behalf Of Scott McMorrow
Sent: Wednesday, April 06, 2005 11:12 AM
To: edpc108@xxxxxxxxx
Cc: si-list@xxxxxxxxxxxxx
Subject: [SI-LIST] Re: Eye diagram measurement
Jaaprakash,
Yes. It can be done with .measure statements, or it can be done with
SiSoft's SiAuditor measurement capability.
scott
Scott McMorrow
Teraspeed Consulting Group LLC
121 North River Drive
Narragansett, RI 02882
(401) 284-1827 Business
(401) 284-1840 Fax
http://www.teraspeed.com
Teraspeed® is the registered service mark of
Teraspeed Consulting Group LLC
Jayaprakash wrote:
> Hi ,
>
> Is it possible to measure eye diagram height and
>width (not graphically) in HSPICE simulations?
>
> Thanks,
>
> Best regards,
> Jayaprakash.
>
>
>
>Send instant messages to your online friends http://uk.messenger.yahoo.com
>------------------------------------------------------------------
>To unsubscribe from si-list:
>si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>
>or to administer your membership from a web page, go to:
>//www.freelists.org/webpage/si-list
>
>For help:
>si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>
>List FAQ wiki page is located at:
> http://si-list.org/wiki/wiki.pl?Si-List_FAQ
>
>List technical documents are available at:
> http://www.si-list.org
>
>List archives are viewable at:
> //www.freelists.org/archives/si-list
>or at our remote archives:
> http://groups.yahoo.com/group/si-list/messages
>Old (prior to June 6, 2001) list archives are viewable at:
> http://www.qsl.net/wb6tpu
>
>
>
>
>
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
