[SI-LIST] Re: Eye diagram measurement
- From: "Dima Smolyansky" <Dima.Smolyansky@xxxxxxxxxxxxxx>
- To: <ludwig@xxxxxxxxxxxxxxxxx>, <vinu@xxxxxxxxx>
- Date: Wed, 6 Apr 2005 14:11:15 -0700
Stefan, Vinu,
StatEye is unquestionably a good tool, and we are trying also to make sure
that our IConnect tools provide the data required by StatEye, such as
S-parameters in Touchstone format.
Thanks,
===================
Dima Smolyansky
TDA Systems, Inc.
4000 Kruse Way Place
Bldg. 2, Suite 300
Lake Oswego, OR 97035
(503) 246-2272
(503) 246-2282 (fax)
IConnect(R) S-parameters version 3.5 is released!
Request your quote for IConnect S-parameters now! www.tdasystems.com
----- Original Message -----
From: "Stefan Ludwig" <ludwig@xxxxxxxxxxxxxxxxx>
To: <vinu@xxxxxxxxx>
Cc: <Dima.Smolyansky@xxxxxxxxxxxxxx>; <edpc108@xxxxxxxxx>;
<si-list@xxxxxxxxxxxxx>
Sent: Wednesday, April 06, 2005 2:03 PM
Subject: [SI-LIST] Re: Eye diagram measurement
> Yes, and we've been using StatEye for the past 12 months extensively. :-)
>
> Cheers,
>
> Stefan
>
> Vinu Arumugham wrote:
>
>>StatEye takes a few minutes to generate an eye diagram from
>>S-parameters. It too includes crosstalk effects. StatEye also includes a
>>DFE.
>>It may take hours though for a simulator to generate the S-parameters or
>>TDT/pulse response of the channels.
>>
>>Thanks,
>>Vinu
>>
>>Dima Smolyansky wrote:
>>
>>
>>
>>>Hello,
>>>
>>>I think one key issue here is the time it takes to generate the eye. In
>>>our
>>>IConnect software, an CJTPAT eye can be generated based on S21 or TDT
>>>(time
>>>domain transmission data) in a manner of seconds. Effects of crosstalk
>>>can
>>>be easily measured and added to the eye, and the eye opening/jitter
>>>information can be measured as well. How long does it take to do this in
>>>simulator? Hours?
>>>
>>>Thanks,
>>>
>>>===================
>>>Dima Smolyansky
>>>TDA Systems, Inc.
>>>4000 Kruse Way Place
>>>Bldg. 2, Suite 300
>>>Lake Oswego, OR 97035
>>>(503) 246-2272
>>>(503) 246-2282 (fax)
>>>
>>>IConnect(R) S-parameters version 3.5 is released!
>>>Request your quote for IConnect S-parameters now! www.tdasystems.com
>>>
>>>
>>>
>>>
>>>>Hi Jayaprakash,
>>>>
>>>>although not directly applicable to your problem, but for the benefit of
>>>>other readers, who're looking for such capabilities, I thought I would
>>>>mention that Apache Design Solutions has a tool called eyed in their
>>>>nspice package, which generates eye diagrams based on the output of
>>>>.probe statements. We've extensively used it more than 18 months ago,
>>>>but I don't know where it stands now.
>>>>
>>>>People have also written scripts (as Scott has mentioned), which do the
>>>>same task (i.e. make a picture and measure the eye).
>>>>
>>>>Cheers,
>>>>
>>>>Stefan
>>>>
>>>>Jayaprakash wrote:
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>>Hi ,
>>>>>
>>>>> Is it possible to measure eye diagram height and
>>>>>width (not graphically) in HSPICE simulations?
>>>>>
>>>>>Thanks,
>>>>>
>>>>>Best regards,
>>>>> Jayaprakash.
>>>>>
>>>>>
>
> --
>
> Ludwig Systems Engineering Consulting - Design - Implementation
> WWW: www.ludwigsystems.com System Architectures - FPGAs - PCBs
> Ph/Fx: +41-43-355-58-73/74 Hardware - Firmware - Software
>
> ------------------------------------------------------------------
> To unsubscribe from si-list:
> si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>
> or to administer your membership from a web page, go to:
> //www.freelists.org/webpage/si-list
>
> For help:
> si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>
> List FAQ wiki page is located at:
> http://si-list.org/wiki/wiki.pl?Si-List_FAQ
>
> List technical documents are available at:
> http://www.si-list.org
>
> List archives are viewable at:
> //www.freelists.org/archives/si-list
> or at our remote archives:
> http://groups.yahoo.com/group/si-list/messages
> Old (prior to June 6, 2001) list archives are viewable at:
> http://www.qsl.net/wb6tpu
>
>
>
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
