They must have just updated the datasheet! This information wasn't there before... Thanks for pointing this out. ======================= Mikhail Matusov Hardware Design Engineer Square Peg Communications Tel.: +1 (613) 271-0044 ext.231 Fax: +1 (613) 271-3007 http://www.squarepeg.ca ----- Original Message ----- From: <Daniel.Peron@xxxxxxxxxx> To: <matusov@xxxxxxxxxxxx> Cc: <si-list@xxxxxxxxxxxxx>; <si-list-bounce@xxxxxxxxxxxxx> Sent: Thursday, March 09, 2006 3:16 AM Subject: [SI-LIST] Re: Effects of overshoot/undershoot on long-term reliability > Hello, > In fact, in the datasheet, there are specifications for over/undershoots > with respect to dutycycle : see table 18. > For instance, it can tolerate overshoots to 3.93V for duty cycles of 10% > or less. > Depending on the duration of the overshoots, you may live with it ... > Pay also attention to the fact that large overshoots mean large radiated > noise for tracks on external layers. > > > Regards > > Daniel Peron > ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List FAQ wiki page is located at: http://si-list.org/wiki/wiki.pl?Si-List_FAQ List technical documents are available at: http://www.si-list.org List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu