Licenses are up and running just fine
[cid:image001.png@01D5371E.DC07E870]
Scott McMorrow, CTO Signal Integrity Group
Samtec
Office 401-284-1827 | +1-800-726-8329
www.samtec.com
-----Original Message-----
From: si-list-bounce@xxxxxxxxxxxxx <si-list-bounce@xxxxxxxxxxxxx> On Behalf Of
Cotton, Chris
Sent: Wednesday, July 3, 2019 2:08 PM
To: farhilltramper@xxxxxxxxx; si-list@xxxxxxxxxxxxx
Subject: [SI-LIST] Re: [EXTERNAL] The gap b/w stitching vias and tline in
serpentine routing
Hi Tramp,
I think it is difficult to answer your question as there are many missing
details such as frequency of interest, spacing relative to dielectric height,
etc. Also, what kind of SNR are you trying to achieve? Is this a digital or
analog/RF application. Generally for digital applications, if you have the
luxury of sufficient spacing to aggressors then forget the GND vias and the
spacing will suffice.
Best regards,
Chris
From: si-list-bounce@xxxxxxxxxxxxx<mailto:si-list-bounce@xxxxxxxxxxxxx>
<si-list-bounce@xxxxxxxxxxxxx<mailto:si-list-bounce@xxxxxxxxxxxxx>> On Behalf
Of Tramp
Sent: Wednesday, July 3, 2019 7:36 AM
To: si-list@xxxxxxxxxxxxx<mailto:si-list@xxxxxxxxxxxxx>
Subject: [EXTERNAL] [SI-LIST] The gap b/w stitching vias and tline in
serpentine routing
[EXTERNAL SENDER: This email originated from outside of Stratus Technologies.
Do not click links or open attachments unless you recognize the sender and know
the content is safe.]
Dear SIlisters,
I did some quick sims sweeping different gaps b/w the stitching ground vias and
tline (Note here the gap refers to the spacing b/w the via and the tline, not
two adjacent ground vias for which I set to twentith lambda) using 2.5D tool
and the results are almost the same. Does anyone have this experience, such as
whether I need to do the sim in 3D, or what distance is recommended? I saw some
implementations put the via at the distance of merely 4mil while the others do
it w/ 20mil. So how on earth is the impact?
--
Best Regards,
Tramp
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx<mailto:si-list-request@xxxxxxxxxxxxx<mailto:si-list-request@xxxxxxxxxxxxx%3cmailto:si-list-request@xxxxxxxxxxxxx>>
with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list<//www.freelists.org/webpage/si-list<//www.freelists.org/webpage/si-list%3chttp:/www.freelists.org/webpage/si-list>>
For help:
si-list-request@xxxxxxxxxxxxx<mailto:si-list-request@xxxxxxxxxxxxx<mailto:si-list-request@xxxxxxxxxxxxx%3cmailto:si-list-request@xxxxxxxxxxxxx>>
with 'help' in the Subject field
List forum is accessible at:
http://tech.groups.yahoo.com/group/si-list<http://tech.groups.yahoo.com/group/si-list<http://tech.groups.yahoo.com/group/si-list%3chttp:/tech.groups.yahoo.com/group/si-list>>
List archives are viewable at:
//www.freelists.org/archives/si-list<//www.freelists.org/archives/si-list<//www.freelists.org/archives/si-list%3chttp:/www.freelists.org/archives/si-list>>
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu<http://www.qsl.net/wb6tpu<http://www.qsl.net/wb6tpu%3chttp:/www.qsl.net/wb6tpu>>
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx<mailto:si-list-request@xxxxxxxxxxxxx> with
'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx<mailto:si-list-request@xxxxxxxxxxxxx> with 'help'
in the Subject field
List forum is accessible at:
http://tech.groups.yahoo.com/group/si-list
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List forum is accessible at:
http://tech.groups.yahoo.com/group/si-list
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
