Dear SIlisters,
I did some quick sims sweeping different gaps b/w the stitching ground vias
and tline (Note here the gap refers to the spacing b/w the via and the
tline, not two adjacent ground vias for which I set to twentith lambda)
using 2.5D tool and the results are almost the same. Does anyone have this
experience, such as whether I need to do the sim in 3D, or what distance is
recommended? I saw some implementations put the via at the distance of
merely 4mil while the others do it w/ 20mil. So how on earth is the impact?
--
Best Regards,
Tramp
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List forum is accessible at:
http://tech.groups.yahoo.com/group/si-list
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
