Why would you want to do that? -----Original Message----- From: Ajay Dhingra Sent: Saturday, August 16, 2014 6:32 AM To: si-list@xxxxxxxxxxxxx Subject: [SI-LIST] Drive strength to Load conversion Hi All What's the standard way to convert drive strength in mA to a equivalent Capacitive load. For example if i want to convert 8mA to equivalent pF load, what's the most reasonable calculation. Apparently considering full voltage swing in C(dv/dt) equation gives pessimistic results. what's the typical dt should be considered. Thanks -- AJAY DHINGRA Bangalore, India 9741414027 It is Attitude,Not Aptitude, that determines your Altitude. ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List forum is accessible at: http://tech.groups.yahoo.com/group/si-list List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List forum is accessible at: http://tech.groups.yahoo.com/group/si-list List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu