It would need to account for the targeted slew rate.. -samit > On Aug 16, 2014, at 6:32 AM, Ajay Dhingra <ajay.dhingra@xxxxxxxxx> wrote: > > Hi All > What's the standard way to convert drive strength in mA to a equivalent > Capacitive load. For example if i want to convert 8mA to equivalent pF > load, what's the most reasonable calculation. > > Apparently considering full voltage swing in C(dv/dt) equation gives > pessimistic results. > what's the typical dt should be considered. > > > Thanks > -- > AJAY DHINGRA > Bangalore, India > 9741414027 > It is Attitude,Not Aptitude, that determines your Altitude. > > > ------------------------------------------------------------------ > To unsubscribe from si-list: > si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > > or to administer your membership from a web page, go to: > //www.freelists.org/webpage/si-list > > For help: > si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > > > List forum is accessible at: > http://tech.groups.yahoo.com/group/si-list > > List archives are viewable at: > //www.freelists.org/archives/si-list > > Old (prior to June 6, 2001) list archives are viewable at: > http://www.qsl.net/wb6tpu > > ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List forum is accessible at: http://tech.groups.yahoo.com/group/si-list List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu