[SI-LIST] Drive strength to Load conversion
- From: Ajay Dhingra <ajay.dhingra@xxxxxxxxx>
- To: si-list@xxxxxxxxxxxxx
- Date: Sat, 16 Aug 2014 19:02:21 +0530
Hi All
What's the standard way to convert drive strength in mA to a equivalent
Capacitive load. For example if i want to convert 8mA to equivalent pF
load, what's the most reasonable calculation.
Apparently considering full voltage swing in C(dv/dt) equation gives
pessimistic results.
what's the typical dt should be considered.
Thanks
--
AJAY DHINGRA
Bangalore, India
9741414027
It is Attitude,Not Aptitude, that determines your Altitude.
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List forum is accessible at:
http://tech.groups.yahoo.com/group/si-list
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
