Thank you Cristian. The adaptive mesh in HFSS is fun. One thing to
remember about tool settings. The box stock settings for EM tools are never
right for accurate solutions. But they are fantastic for demonstrations by
FAEs during an hour visit.
On Fri, May 28, 2021, 1:18 AM Cristian Gozzi <cristian.gozzi@xxxxxxxxx>
wrote:
Great presentation Scott and Rickard
A lot of people use to forget the importance of correct usage and settings
of ports in HFSS and how it impacts the accuracy
You may think to do another one based on the proper setting of adaptive
mesh based on the application and frequency of interest⦠many people use to
do mistakes here as well, especially when they switch from tools that use
fixed mesh refinement and then they try the same settings in HFSS
Thanks for your contribution and for sharing your knowledge with everyone
Regards
Cris
On Thu, May 27, 2021 at 8:20 PM Scott McMorrow <scottmcmorrow@xxxxxxxxx>
wrote:
Start here and watch the video. This is a presentation I did last week
with Rickard
Petersson, R&D Director, Ansys
https://blog.samtec.com/post/practical-ports-for-perfect-performance-pretend-or-possible/
On Thu, May 27, 2021, 10:03 PM Nikita Ambasana <ambasananikita@xxxxxxxxx>
wrote:
Hello,of a
Is there a relation between the physical length being de-embedded out
structure (microstrip - DUT - microstrip) and accuracy of de-embeddingin
the 2-20GHz range for HFSS? Is there some limitation on thethe
electrical length on either side of the DUT that cannot be accurately
de-embedded for this frequency range and could cause spurious spikes in
S-parameters?
Thanks,
Nikita
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List forum is accessible at:
http://tech.groups.yahoo.com/group/si-list
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List forum is accessible at:
http://tech.groups.yahoo.com/group/si-list
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
