Hi Experts,
When I measure s-parameters of transmission line, I found S21 or Sdd21 cure
with sharp dip at some frequency points, but there is no dip for shorter trace
at same layer.
I read Eric Bogatin's article "How to Read S-Parameters Like a Book", there is
a section is about "sharp dip", but its seem not match my case. In fact we use
standard Delta-L coupon design to do measurement, then implement de-embedding.
When we put Sdd21 curve together, Sdd21 of 10inch trace have obvious dip, 5inch
trace also have but not obvious, 2inch trace no(perhaps submerged by
multi-reflection?),And the dip frequency point of 10inch and 5inch trace are
almost same. After de-embedding, the dip is more obvious.
Is there any advice or experience to share? We could do some test and study.
B&R
Tommy
Legal Disclaimer: The information contained in this message may be privileged
and confidential. It is intended to be read only by the individual or entity to
whom it is addressed or by their designee. If the reader of this message is not
the intended recipient, you are on notice that any distribution of this
message, in any form, is strictly prohibited. If you have received this message
in error, please immediately notify the sender and delete or destroy any copy
of this message.
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List forum is accessible at:
http://tech.groups.yahoo.com/group/si-list
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu