Hi Jack, XTK can only calculate delays(or "flight time"). If you want to evaluate SETUP and HOLD, or SKEW, JITTER etc., you may employ another timing analysis tool, such as BLAST, Tau, and (I use) TimingDesigner. Regards, On Fri, 15 Nov 2002 09:46:18 +0800 "Jack W.C. Lin" <JackWCLin@xxxxxxxxxxxx> wrote: > Hi All SI Friends: > Is there any way for XTK to generate a correct timing and SI report when > input files include SIF file or MDC file? Thanks! > Jack > > > ------------------------------------------------------------------ > To unsubscribe from si-list: > si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > > or to administer your membership from a web page, go to: > //www.freelists.org/webpage/si-list > > For help: > si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > > List archives are viewable at: > //www.freelists.org/archives/si-list > or at our remote archives: > http://groups.yahoo.com/group/si-list/messages > Old (prior to June 6, 2001) list archives are viewable at: > http://www.qsl.net/wb6tpu > > //// /// // / / / / / / / / / / Tadashi Arai//Platform Design Dept.,Mobile Computing Div. Fujitsu Limited arap@xxxxxxxxxxxxxx TEL:+81-42-370-7624 Ohmaru, Inagi-shi, Tokyo, Japan / / / / / / / / / / / // //// ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu