BOARD IS FOR A CHIP CHARECTERISATION. NEW ASIC FOR MOBILE TECHNOLOGY. S A Prasad +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ This e-mail is intended for the use of the individual or entity named above and may contain information that is confidential and privileged. If you are not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this e-mail is strictly prohibited.If you have received this e-mail in error, please notify us immediately at prasadsa@xxxxxxxxxx and destroy the original message. While this e-mail and any attachments have been scanned for common computer viruses and found to be virus free, we recommend you also perform your own virus checking processes before opening any attachments. +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ----- Original Message ----- From: "steve weir" <weirsp@xxxxxxxxxx> To: <a.ingraham@xxxxxxxx>; <si-list@xxxxxxxxxxxxx> Sent: Friday, June 04, 2004 12:14 AM Subject: [SI-LIST] Re: 50 ohm and 130 ohm on the same board > Andrew, are you talking about the old slow single ended SCSI-2/3, or LVDS > SCSI. The LVDS is differential. > > Regards, > > > Steve. > At 10:43 AM 6/3/2004 -0400, Ingraham, Andrew wrote: > >Might it be for something like SCSI, or a ribbon cable that goes off the > >board? > > > >It's been a while since I worked with a SCSI design, but I recall having to > >push the envelope a bit. Maybe not 130 ohms, but 110 or thereabouts. > > > >Regards, > >Andy > > > > > Can you tell us for what and why 130 Ohm SE is needed? > > > > > >------------------------------------------------------------------ > >To unsubscribe from si-list: > >si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > > > >or to administer your membership from a web page, go to: > >//www.freelists.org/webpage/si-list > > > >For help: > >si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > > > >List FAQ wiki page is located at: > > http://si-list.org/wiki/wiki.pl?Si-List_FAQ > > > >List technical documents are available at: > > http://www.si-list.org > > > >List archives are viewable at: > > //www.freelists.org/archives/si-list > >or at our remote archives: > > http://groups.yahoo.com/group/si-list/messages > >Old (prior to June 6, 2001) list archives are viewable at: > > http://www.qsl.net/wb6tpu > > > > > ------------------------------------------------------------------ > To unsubscribe from si-list: > si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > > or to administer your membership from a web page, go to: > //www.freelists.org/webpage/si-list > > For help: > si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > > List FAQ wiki page is located at: > http://si-list.org/wiki/wiki.pl?Si-List_FAQ > > List technical documents are available at: > http://www.si-list.org > > List archives are viewable at: > //www.freelists.org/archives/si-list > or at our remote archives: > http://groups.yahoo.com/group/si-list/messages > Old (prior to June 6, 2001) list archives are viewable at: > http://www.qsl.net/wb6tpu > > ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List FAQ wiki page is located at: http://si-list.org/wiki/wiki.pl?Si-List_FAQ List technical documents are available at: http://www.si-list.org List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu