Andrew, are you talking about the old slow single ended SCSI-2/3, or LVDS SCSI. The LVDS is differential. Regards, Steve. At 10:43 AM 6/3/2004 -0400, Ingraham, Andrew wrote: >Might it be for something like SCSI, or a ribbon cable that goes off the >board? > >It's been a while since I worked with a SCSI design, but I recall having to >push the envelope a bit. Maybe not 130 ohms, but 110 or thereabouts. > >Regards, >Andy > > > Can you tell us for what and why 130 Ohm SE is needed? > > >------------------------------------------------------------------ >To unsubscribe from si-list: >si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > >or to administer your membership from a web page, go to: >//www.freelists.org/webpage/si-list > >For help: >si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > >List FAQ wiki page is located at: > http://si-list.org/wiki/wiki.pl?Si-List_FAQ > >List technical documents are available at: > http://www.si-list.org > >List archives are viewable at: > //www.freelists.org/archives/si-list >or at our remote archives: > http://groups.yahoo.com/group/si-list/messages >Old (prior to June 6, 2001) list archives are viewable at: > http://www.qsl.net/wb6tpu > ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List FAQ wiki page is located at: http://si-list.org/wiki/wiki.pl?Si-List_FAQ List technical documents are available at: http://www.si-list.org List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu