[SI-LIST] 4-Port VNA calibration question
- From: Virendra <adsurevv@xxxxxxxxx>
- To: si-list@xxxxxxxxxxxxx, istvan.novak@xxxxxxx
- Date: Mon, 17 Apr 2006 10:01:32 -0700 (PDT)
Hi All,
I have a question about calibrating a VNA for 4-port measurements. We are
using standard pico probes and Agilent 87xxX VNA. The problems we are having
is that one pair of probes now have different pitch than the other pair and it
is not possible to use the same calibration substrate for both the pairs. Does
anyone know a way to calibrate this kind of setup with two different
calibration substrates?
thanks in advance,
Virendra
---------------------------------
Talk is cheap. Use Yahoo! Messenger to make PC-to-Phone calls. Great rates
starting at 1¢/min.
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
