Steve, I don't think i understood you correctly about getting a new pair. Maybe i should state my problem more numerically. With the setup i have one pair of probes (port 1 and 2) which are less than 200um in pitch and other pair of probes (port 3 and 4) which are more than 800um in pitch. As for why the change, it is a new structure. thanks again, Virendra steve weir <weirsi@xxxxxxxxxx> wrote: Virenda, that sounds like a recipe for trouble to me. I would go out and buy a match to the new pair or exchange the new pair for a match with the old pair. Why did you change geometry? Steve. At 10:01 AM 4/17/2006, Virendra wrote: >Hi All, >I have a question about calibrating a VNA for 4-port >measurements. We are using standard pico probes and Agilent 87xxX >VNA. The problems we are having is that one pair of probes now have >different pitch than the other pair and it is not possible to use >the same calibration substrate for both the pairs. Does anyone know >a way to calibrate this kind of setup with two different calibration >substrates? >thanks in advance, >Virendra > > >--------------------------------- >Talk is cheap. Use Yahoo! Messenger to make PC-to-Phone >calls. Great rates starting at 1¢/min. > >------------------------------------------------------------------ >To unsubscribe from si-list: >si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > >or to administer your membership from a web page, go to: >//www.freelists.org/webpage/si-list > >For help: >si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > >List FAQ wiki page is located at: > http://si-list.org/wiki/wiki.pl?Si-List_FAQ > >List technical documents are available at: > http://www.si-list.org > >List archives are viewable at: > //www.freelists.org/archives/si-list >or at our remote archives: > http://groups.yahoo.com/group/si-list/messages >Old (prior to June 6, 2001) list archives are viewable at: > http://www.qsl.net/wb6tpu > --------------------------------- Talk is cheap. Use Yahoo! Messenger to make PC-to-Phone calls. Great rates starting at 1¢/min. ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List FAQ wiki page is located at: http://si-list.org/wiki/wiki.pl?Si-List_FAQ List technical documents are available at: http://www.si-list.org List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu