Wes, You can still attend because you'll be able to hear what's going on and you can type text in the room if you have something to say. Dan ----- Original Message ----- From: "wes britton" <spywise@xxxxxxxxxxx> To: <sacate@xxxxxxxxxxxxx> Sent: Sunday, October 28, 2007 10:53 PM Subject: [sacate] Re: Instructions for Installing TC Web Conference > Tom--hey, who needs me? Dan can do double duty being him and me--and > taking > care of giving you the abuse I won't be able to do, being mike-less. > That's > microphone, not Riley. > > Wes > > ----- Original Message ----- > From: "Dan Kerstetter" <dhk55@xxxxxxxxxxx> > To: <sacate@xxxxxxxxxxxxx> > Sent: Sunday, October 28, 2007 1:35 PM > Subject: [sacate] Instructions for Installing TC Web Conference > > >> As promised, this message contains the instructions for the installation >> of TC Web Conference as well as for talking in the chat room. >> I am putting the link that you will be going to at the end of these >> instructions. This way you can decide whether you want to leave the >> message open and refer back to it when you have the web page open; or >> whether you want to take notes before you begin--whatever works best for >> you. >> >> 1. Please read all the numbered instructions in this message before >> going >> to the link at the end. >> 2. Go to the link at the end of this message and press enter. You will >> be taken to a web page which gives you an idea about what the chat room >> is. You can skip that and go to the link on the page that says "enter >> the >> chat room" and press enter. >> 3. After doing this, you'll be taken to a welcome page which explains a >> little about the software. To clear up any confusion you may have, on >> that page, they call it talkcom, but when you run the actual program, it >> is called TC Web Conference. >> 4. Also on that page you will find a download button. Press enter on >> that button and the process begins. >> 5. When you are asked if you want to run or save the software, press alt >> r for run. The software will then begin to download. (Note: Leave this >> web page open during the software installation. That way when the >> installation is finished you can be right there and ready to log in.) >> 6. Following this, you will have the usual Microsoft dialog about >> running >> the software. When you hear this dialog, press alt r again to run. >> 7. the software will install itself. (note: I already have the >> software >> installed on my machine so I cannot remember whether or not there is a >> license agreement. If so, agree to it.) >> 8. The installation will complete and there will be a finish button. >> Press enter on it and you're ready to go. >> 9. After your software is installed and you are back on the chat room >> web >> page, go to the link that says "click here to enter the room". >> 10. After doing this, you will see a log on screen. If you tab around >> the screen, you will see fields for a user name and password. To enter >> the room, simply go to the user name field and type your first name and >> press enter. >> 11. Now you should be in the chat room. If you want to talk, press the >> control key. You should hear a small beep. >> >> If you encounter any problems or have questions, you can call me at >> 379-9341 or email me at >> >> dhk55@xxxxxxxxxxx >> >> We have nine days from the time of this writing and I know we can do >> this. >> >> Dan Kerstetter >> >> Below is the link you will need to begin: >> >> http://www.blindcooltech.com/chat.htm >> >> >> >> > >