Cool. Who did more work: you or the dog. Ha ha. Dan ----- Original Message ----- From: "Tom k" <tom.kl@xxxxxxxxxxx> To: <sacate@xxxxxxxxxxxxx> Sent: Sunday, October 28, 2007 9:13 PM Subject: [sacate] Re: Instructions for Installing TC Web Conference > Ok, I'm all ready to go! That was really easy! > Tom and Tinko! > ----- Original Message ----- > From: Dan Kerstetter > To: sacate@xxxxxxxxxxxxx > Sent: Sunday, October 28, 2007 1:35 PM > Subject: [sacate] Instructions for Installing TC Web Conference > > As promised, this message contains the instructions for the installation > of > TC Web Conference as well as for talking in the chat room. > I am putting the link that you will be going to at the end of these > instructions. This way you can decide whether you want to leave the > message > open and refer back to it when you have the web page open; or whether you > want to take notes before you begin--whatever works best for you. > > 1. Please read all the numbered instructions in this message before going > to the link at the end. > 2. Go to the link at the end of this message and press enter. You will > be > taken to a web page which gives you an idea about what the chat room is. > You can skip that and go to the link on the page that says "enter the chat > room" and press enter. > 3. After doing this, you'll be taken to a welcome page which explains a > little about the software. To clear up any confusion you may have, on > that > page, they call it talkcom, but when you run the actual program, it is > called TC Web Conference. > 4. Also on that page you will find a download button. Press enter on > that > button and the process begins. > 5. When you are asked if you want to run or save the software, press alt > r > for run. The software will then begin to download. (Note: Leave this > web > page open during the software installation. That way when the > installation > is finished you can be right there and ready to log in.) > 6. Following this, you will have the usual Microsoft dialog about running > the software. When you hear this dialog, press alt r again to run. > 7. the software will install itself. (note: I already have the software > installed on my machine so I cannot remember whether or not there is a > license agreement. If so, agree to it.) > 8. The installation will complete and there will be a finish button. > Press > enter on it and you're ready to go. > 9. After your software is installed and you are back on the chat room web > page, go to the link that says "click here to enter the room". > 10. After doing this, you will see a log on screen. If you tab around > the > screen, you will see fields for a user name and password. To enter the > room, simply go to the user name field and type your first name and press > enter. > 11. Now you should be in the chat room. If you want to talk, press the > control key. You should hear a small beep. > > If you encounter any problems or have questions, you can call me at > 379-9341 > or email me at > > dhk55@xxxxxxxxxxx > > We have nine days from the time of this writing and I know we can do this. > > Dan Kerstetter > > Below is the link you will need to begin: > > http://www.blindcooltech.com/chat.htm > > > > > >