Hello Richard,
I had this problem with overlapping frames two times. The last time I sent the
120 6000 magazine to DHW. The changed all internal parts of my magazine. Since
that time that problem never occurred again. Therefore it is a problem that can
be solved by a service workshop. Looking on my contact sheets I realized that
the spacing distance varies with the tendency to widen at the end of the roll.
After all this is a rather cosmetic issue to me.
Kind regards,
Volker
______________________
mailto: volker_muth@xxxxxxx
Am 20.01.2016 um 23:35 schrieb Richard Urmonas:
I just picked up my first test film through the 6006. I use
Rollei CR200 slide film. The frame spacing is very poor. In the worst
case there is 16mm of overlap between two frames. Looking at the
sensing roller it seems to be clean and to turn without much effort.
Does anyone have a hint what to look for / check to improve this?
Thank you,
Richard Urmonas
---
Rollei List
- Post to rollei_list@xxxxxxxxxxxxx
- Subscribe at rollei_list-request@xxxxxxxxxxxxx with 'subscribe'
in the subject field OR by logging into www.freelists.org
- Unsubscribe at rollei_list-request@xxxxxxxxxxxxx with
'unsubscribe' in the subject field OR by logging into www.freelists.org
- Online, searchable archives are available at
//www.freelists.org/archives/rollei_list
