Thank you Volker,
It is worrying that they changed all the internal parts, as this
suggests it is something more than just a simple clean or lubricate.
Some small variation is spacing is not a concern for me, but a
substantial overlap is unacceptable. I may see if I can source another
back.
Richard Urmonas
On Wed, 20 Jan 2016 23:55:15 +0100
Volker Muth <volker_muth@xxxxxxx> wrote:
Hello Richard,
I had this problem with overlapping frames two times. The last time I
sent the 120 6000 magazine to DHW. The changed all internal parts of
my magazine. Since that time that problem never occurred again.
Therefore it is a problem that can be solved by a service workshop.
Looking on my contact sheets I realized that the spacing distance
varies with the tendency to widen at the end of the roll. After all
this is a rather cosmetic issue to me.
Kind regards,
Volker
______________________
mailto: volker_muth@xxxxxxx
Am 20.01.2016 um 23:35 schrieb Richard Urmonas:
I just picked up my first test film through the 6006. I use
Rollei CR200 slide film. The frame spacing is very poor. In the
worst case there is 16mm of overlap between two frames. Looking at
the sensing roller it seems to be clean and to turn without much
effort.
Does anyone have a hint what to look for / check to improve this?
Thank you,
Richard Urmonas
---
Rollei List
- Post to rollei_list@xxxxxxxxxxxxx
- Subscribe at rollei_list-request@xxxxxxxxxxxxx with 'subscribe'
in the subject field OR by logging into www.freelists.org
- Unsubscribe at rollei_list-request@xxxxxxxxxxxxx with
'unsubscribe' in the subject field OR by logging into
www.freelists.org
- Online, searchable archives are available at
//www.freelists.org/archives/rollei_list
