[rollei_list] Re: Uneven frame spacing on 6006

  • From: Richard Urmonas <richard@xxxxxxxxxxx>
  • To: rollei_list@xxxxxxxxxxxxx
  • Date: Thu, 21 Jan 2016 05:31:06 -0800

The 6000 magazines measure the film as it travels past the pressure
plate. The bright chrome roller does this.

Richard Urmonas


On Thu, 21 Jan 2016 09:42:49 +0100 (CET)
Sven Keller <keller.schaefer@xxxxxxxxxxxxx> wrote:

If I remember correctly, classic Rolleiflexes actually measure the
film length by means of that little wheel that runs on the backing
paper (under the takeup spool). So if one of these shows uneven
spacing, this indeed calls for a service.  

Rollei 6000 magazines and e.g. the Rolleiflex GX (and T?) don't do
that, they have a pre-programmed travel they allow for each
particular frame. So if on these cameras the spacing is erratic, this
is again a matter for service. If the spacing just gets slightly
longer or shorter frame after frame, this is due to the different
combined thickness of backing paper and film of the different film
brands.

Regards,

Sven


Volker Muth <volker_muth@xxxxxxx> hat am 20. Januar 2016 um 23:55
geschrieben:

Hello Richard,

I had this problem with overlapping frames two times. The last time I
sent the 120 6000 magazine to DHW. The changed all internal parts of
my magazine. Since that time that problem never occurred again.
Therefore it is a problem that can be solved by a service workshop.
Looking on my contact sheets I realized that the spacing distance
varies with the tendency to widen at the end of the roll. After all
this is a rather cosmetic issue to me.

Kind regards,

Volker
______________________
mailto: volker_muth@xxxxxxx

Am 20.01.2016 um 23:35 schrieb Richard Urmonas:
I just picked up my first test film through the 6006.  I use
Rollei CR200 slide film.  The frame spacing is very poor.  In the
worst case there is 16mm of overlap between two frames.  Looking at
the sensing roller it seems to be clean and to turn without much
effort.

Does anyone have a hint what to look for / check to improve this?

Thank you,

Richard Urmonas
---
Rollei List

- Post to rollei_list@xxxxxxxxxxxxx

- Subscribe at rollei_list-request@xxxxxxxxxxxxx with 'subscribe'
in the subject field OR by logging into www.freelists.org

- Unsubscribe at rollei_list-request@xxxxxxxxxxxxx with
'unsubscribe' in the subject field OR by logging into
www.freelists.org

- Online, searchable archives are available at
//www.freelists.org/archives/rollei_list



  --- Rollei List - Post to rollei_list@xxxxxxxxxxxxx - Subscribe at
rollei_list-request@xxxxxxxxxxxxx with 'subscribe' in the subject
field OR by logging into www.freelists.org - Unsubscribe at
rollei_list-request@xxxxxxxxxxxxx with 'unsubscribe' in the subject
field OR by logging into www.freelists.org - Online, searchable
archives are available at
//www.freelists.org/archives/rollei_list
---
Rollei List

- Post to rollei_list@xxxxxxxxxxxxx

- Subscribe at rollei_list-request@xxxxxxxxxxxxx with 'subscribe' 
in the subject field OR by logging into www.freelists.org

- Unsubscribe at rollei_list-request@xxxxxxxxxxxxx with 
'unsubscribe' in the subject field OR by logging into www.freelists.org

- Online, searchable archives are available at
//www.freelists.org/archives/rollei_list

Other related posts: