[rollei_list] Re: New charger for Rolleiflex 6000 cameras

  • From: Volker Muth <volker_muth@xxxxxxx>
  • To: rollei_list@xxxxxxxxxxxxx
  • Date: Thu, 6 Apr 2017 13:02:19 +0200

Hello John,

when I bought my Rolleiflex 6008 professional in 2010 it needed new NiCad cells 
and a CLA. I have noticed that theses NiCad cells discharge in roughly three 
months time. To be on the safe side, I fully charged the batteries before a 
photo shooting and never lost a photo. In 2014 I bought a new NiMH battery 
(1.25A 10V slow acting) and used it with my 6008 without any problems. 
Therefore maybe the cause of your problem with the NiMH battery is rather the 
camera and not the battery.

Best regards,

Volker
______________________
mailto: volker_muth@xxxxxxx

Am 06.04.2017 um 12:46 schrieb John Wild:

Thank you Volker.

If you try one of these, I will be interested to know know how you get on.

At the moment I have two NiCd packs which still hold enough charge for what I 
want but I have to make sure they are charged two or three days before I want 
them; they do no hold a full charge for more than a week or so.

The NiMh packs work fine in my 6006 but not in my 6008. I can only think it 
is the extra power of the motor in the 6008 (1.25A as compared to 1A in the 
6006) which causes the problem. Possibly it is an adjustment issue in my 
camera or maybe the motor in my camera has a fault and requires more current 
to operate it. I will try to use the slow setting from my Master Control Unit 
and see if that makes any difference.

I will also contact the factory and ask them if there is a problem with my 
6008.

Best regards

John


From: rollei_list-bounce@xxxxxxxxxxxxx <rollei_list-bounce@xxxxxxxxxxxxx> on 
behalf of Volker Muth <volker_muth@xxxxxxx>
Sent: 06 April 2017 11:00
To: rollei_list@xxxxxxxxxxxxx
Subject: [rollei_list] Re: New charger for Rolleiflex 6000 cameras
 
Hello John,

I have asked Mr. Wiese about the higher voltage of his new batteries. He 
guarantees that they don's damage the cameras circuits. Wiese Fototechnik is 
a small but well qualified firm with four engineers that have done product 
development and custom built solutions in the past. They have received 
trainings by Leica, Zeiss, Sinar, Rollei, Rolleimetric, Tokina and Jenoptik 
over the years. More on 
http://wiese-fototechnik.de/Website/English/About_us.html. Therefore I am ;
confident to use the new batteries. I am very glad that someone is developing 
new products for the Rolleiflex 6000 system.

Best regards,

Volker
______________________



Other related posts: