Threw on a swivel just in case ours decided for some reason to lose the
drogue.
Chris
From: Mike & Nancy Kramer <kramer@xxxxxxxxxxxx>
To: roc-chat@xxxxxxxxxxxxx,
Date: 06/07/2015 04:44 PM
Subject: [roc-chat] Re: Punisher on a K1440
Sent by: roc-chat-bounce@xxxxxxxxxxxxx
anyone thinking no drogue just let it flat spin with a long shock cord?
Mike Kramer
On 6/7/2015 3:03 PM, David Reese wrote:
Hi all,
Here's how mine is built:
Retainer -- Aeropack standard
Drogue -- maybe
Main -- yes
Altimeter -- RRC2+
Tracking -- ComSpec/RocketHunter ch. 451
Main -- 500' (unless the W is there, then 300')
Dry CG -- 28.5" from nose tip
Wet CG -- 33.5" from nose tip
All-up weight -- 8.29 lbm
I have a 16-pad wireless Wilson F/X system on the way to handle the race
(we can use it for the other away cells too, if the board so desires),
which I plan to set up at the designated spot Friday afternoon. We can
drag the pads out then, too. This way, there's minimal impact on the rest
of the range.
I have hardware sets and reloads for distribution (see attachment for
gratuitous rocket porn) and will have them available starting on Friday --
show me your prepped rocket and I'll hand over the loot :-)
The website says the range opens at 0800 so let's meet at the Wildman West
tent then and have these things off the ground ASAP so we can minimize
impact to range ops. Is that OK with everyone?
See you at the lakebed!
--david