[roc-chat] Re: Old Dr. Rocket 98mm forward closure with ejection well?
- From: Jack Garibaldi <jackgaribaldi@xxxxxxx>
- To: <roc-chat@xxxxxxxxxxxxx>
- Date: Mon, 8 Aug 2011 13:26:08 -0700
Oh John one more thing they will officially tell you that they were not
certified with them so no warranty but they will work, I lost a smoke charge
at a launch one time and cut off a piece of my broom handle and wrapped
electrical tape to snug fit it and it was glorious.
Jack G
From: roc-chat-bounce@xxxxxxxxxxxxx [mailto:roc-chat-bounce@xxxxxxxxxxxxx]
On Behalf Of John Howard
Sent: Sunday, August 07, 2011 11:34 AM
To: roc-chat@xxxxxxxxxxxxx
Subject: [roc-chat] Old Dr. Rocket 98mm forward closure with ejection well?
Anyone know if the old style Dr. Rocket 98mm forward closure with an
ejection well will work with current AT loads?
I can't find much on the web, and only have found two Dr Rocket closures on
his ancient website with http://wayback.archive.org/web/. One is listed as
regular, the other as extended. Aerotech and Rouse-Tech only make a normal
length enclosure now. So I'm assuming that extended 98mm closures won't work
anymore?
I did find that delay's for the 98mm are no longer approved for use, but one
could plug the hole for the ignition of the charge, and use it as a plugged
closure. But one of these is scrap metal if I can't really use it in the
future.
Thanks,
John
P.S. Attached is pic of one
<webkit-fake-url://4BA527CF-CE1D-4C9C-88BF-602B76307C7A/image.tiff>
Other related posts:
