[python] Re: Suspension
- From: "Henk van Eerden" <h.vaneerden@xxxxxxxxxxxx>
- To: <python@xxxxxxxxxxxxx>
- Date: Sat, 2 Dec 2006 15:36:36 +0100
Hello Rhisiart,
thank you for your interest in the trike. As i mentioned beforen it's just a
simple design, nothing fancy all practical.
----- Original Message -----
From: "Rhisiart Gwilym" <Rhisiart@xxxxxxxxxxxxxx>
To: <python@xxxxxxxxxxxxx>
Sent: Saturday, December 02, 2006 2:38 PM
Subject: [python] Re: Suspension
> Siwmae Henk!
>
> Henk, strike that last question. Obviously, its the fork for the
> two-wheel rig. Took me three hours to see it. Dumkopf!
>
> Thanks for these pictures. Really helpful and encouraging. And waddya
> know! I actually have a pair of wheelchair wheels in my stash of bike
> parts, just like the ones you use. I was wondering about the
> inward-leaning cant for them too, like you have, and like they have
> on the sport wheelchairs. All the same, I'm still pondering whether
> to use 20 inch wheels all round.
>
> Some questions, though:
>
> 1) What's the point of the piece of square-section framing tube that
> goes over the top of the front wheel?
>
> 2) Although the front end seems pretty close in form to Jurgen's P
> series designs, you seem to feel the need for a steering damper.
> Why's that? Does your design demand it?
>
> 3) Did you use parts of a BB assembly in the steering joint? I can't
> seem to see any part of a crank arm end at the couplings. Can you
> describe/show how you do it?
>
> 4) I presume the two pieces of hose-sheathed tube on the rear end
> structure are for bracing, yes? But why the sheathing?
>
> 5) There seems to be a front-fork built in under the rear end. What's that
for?
>
> Cofion, Rhisiart G
> ============================================================
>
> This is the Python Mailinglist
>
> //www.freelists.org/list/python
>
> Listmaster: Jürgen Mages jmages@xxxxxx
>
> To unsubscribe send an empty mail to
> python-request@xxxxxxxxxxxxx
> with 'unsubscribe' in the subject field.
>
> ============================================================
>
============================================================
This is the Python Mailinglist
//www.freelists.org/list/python
Listmaster: Jürgen Mages jmages@xxxxxx
To unsubscribe send an empty mail to
python-request@xxxxxxxxxxxxx
with 'unsubscribe' in the subject field.
============================================================
Other related posts:
