[pure-silver] Re: Print Flattening Metal Plate

  • From: Russ Gorman <rusty57@xxxxxxx>
  • To: pure-silver@xxxxxxxxxxxxx
  • Date: Wed, 27 Dec 2017 19:45:38 -0800

Hi Adrienne,

The one I have came from Zone VI - not sure who originally made them, but it is 
literally a piece of steel with the ends bent up, then out (so two bends at 
each end) then powder coated with enamel. Any sheet metal place could make one 
easily and quickly for half the price of the one you link to below.

__                          __
    \____________/

Any reasonably sized town usually has a metalworks place that would do this for 
you.  1/16 inch steel is what mine is made from. ( I  think steel comes in 
gauges not inches but don't know the conversion )


It works great and I use it for dry mounting all the time.

It has two holes drilled through the hand grips to hang it on the wall when not 
in use.

Ideally you would have it powder coated ( enamel) which the shop could direct 
you to or spray painted with enamel.  

Here's an example place online but it would be cheaper locally to avoid 
shipping costs: 

https://www.xometry.com/sheet-metal-fabrication/

Search for "sheet metal" near you.


Russ

On Dec 27, 2017, at 3:41 PM, Adrienne Moumin <photowonder2010@xxxxxxxxxxx> 
wrote:

Happy Holidays, everyone!

I am looking for a metal plate for print flattening post-drymounting.

I'm in the planning stages of mounting 24 8x10 prints in an array of 4 high x 
6 wide, for a total image size of 39" x 44". I am mounting on a sheet of 
4-ply Rising mat board. So I will need something to quickly flatten and cool 
each section as I pull the entire behemoth out of my 16x20 press. I've done 
smaller mounted photo collages before, but I will need to move fast with this 
one.

I vaguely remember some sort of flat lead(?) plates, with all 4 sides 
up-fluted for easy grabbing, meant for exactly this purpose. Perhaps I don't 
know the right search terms, or perhaps such things went out with the Model 
T. 

This is the closest I have found, but it's pretty expensive for the large 
size.
http://www.talasonline.com/Paper-Weights ;
<http://www.talasonline.com/Paper-Weights>

I'm wondering if anyone has any ideas or leads for what I'm seeking?

With advance thanks,
Adrienne

Adrienne Moumin
Handmade B&W photographs and photo collages: http:// ;
<http://picturexhibit.com/>picturexhibit.com <http://picturexhibit.com/>
Architextures series: http://picturexhibit.com/html/architextures.html ;
<http://picturexhibit.com/html/architextures.html>
 <http://picturexhibit.com/>
NYC and Silver Spring, MD
212-602-1809

Other related posts: