Be careful! Not all thermostats are the same nor will they fit. One made for the 210M will not work in a 210 or a 200. The fittings are different. Dave ----- Original Message ----- From: "Jim Brick" <jim@xxxxxxxxx> To: <pure-silver@xxxxxxxxxxxxx> Cc: "Len Eselson" <leneselson@xxxxxxxxxxxxx> Sent: Monday, January 24, 2005 9:32 AM Subject: [pure-silver] Re: Parts for old Seal Press > The electronic thermostat for a Seal Commercial 210M is part number 1407-1. > For the Thermostat kit, it is 100897KIT. > > The last time I ordered parts, I called (203) 729-5201 which was the Seal > Products Inc, division of Hunt Manufacturing. 550 Spring St., Naugatuck, CT > 06770-9985. > > Jim > > > At 10:21 AM 1/22/2005, Len Eselson wrote: > >Does anyone have a source for parts for > >an old Seal Press (I think it may be a 'Commercial 200) > >I need a thermostat. > > > >Thanks > > > >Len Eselson > > ============================================================================ ================================= > To unsubscribe from this list, go to www.freelists.org and logon to your account (the same e-mail address and password you set-up when you subscribed,) and unsubscribe from there. > ============================================================================================================= To unsubscribe from this list, go to www.freelists.org and logon to your account (the same e-mail address and password you set-up when you subscribed,) and unsubscribe from there.