[pskmail] Re: Server Error Message?
- From: barkerg@xxxxxxxxxxxxx
- To: pskmail@xxxxxxxxxxxxx
- Date: Mon, 19 Jul 2010 06:10:04 -0600 (MDT)
John: The Canadian regulations don't mention baud rate, only a maximum
bandwidth of 1 KHz on 30m and 6 KHz on most other HF bands as per the
attached document. I will try Paul's fldigi upgrade suggestion first.
Thanks,
Gary
> Hi Gary,
>
> I suspect it should not show in your case since you are in North
> America and the list of modes used for automatic modes adjustments is:
>
> THOR8 MFSK16 THOR22 MFSK32 PSK125R PSK250R PSK250.
>
> But I just checked the source code of the server and it only takes
> into account USA Ham prefixes for switching to that list.
>
> A VE prefix will currently uses the other list used elsewhere:
>
> THOR8 MFSK16 THOR22 MFSK32 PSK250R PSK500R PSK500
>
> Do you also have the 300bauds limit as per the FCC in the USA?
>
> If so, I can send you an updated version of the server which will
> include Canadian prefixes, until we integrate this in the server code.
>
> Please note that you can still use the server on that mode. Just
> ignore the message if that what you want. But note that it will not
> switch modes automatically unless the mode used by the client at
> connect time is in the list.
>
> This is because that list is arranged in ascending order of speed /
> descending order of robustness and the program does not know what to
> do with a mode outside the list.
>
> All the best,
>
> 73, John
>
> On Mon, Jul 19, 2010 at 3:05 AM, <barkerg@xxxxxxxxxxxxx> wrote:
>> I recently set up a pskmail server version 1.0.3 using fldigi 3.11.4 on
>> Ubuntu 9.10. After starting the server in a terminal it keeps displaying
>> the message:
>>
>> Mode not in list: PSK250
>>
>> Is this an error or something to be concerned with?
>>
>> Regards,
>> Gary
>> VE6UQ
>>
>>
>>
>
>
Other related posts:
