[pskmail] Re: Server Error Message?

  • From: Paul Veldkamp <Paul.Veldkamp@xxxxxxx>
  • To: "'pskmail@xxxxxxxxxxxxx'" <pskmail@xxxxxxxxxxxxx>
  • Date: Mon, 19 Jul 2010 09:57:06 -0400

John, Gary uses an old version fldigi, as far as I know only 5.20 and higher 
works with R

regards
Paul
**sent from my wireless BlackBerry**

----- Oorspronkelijk bericht -----
Van: pskmail-bounce@xxxxxxxxxxxxx <pskmail-bounce@xxxxxxxxxxxxx>
Aan: pskmail@xxxxxxxxxxxxx <pskmail@xxxxxxxxxxxxx>
Verzonden: Mon Jul 19 09:52:22 2010
Onderwerp: [pskmail] Re: Server Error Message?

Gary,

Then there is no need to change the software and I suggest you use
PSK500R (as fast than PSK250 and more sensitive ( 1 or 2 dB) and more
robust to QRM but double the bandwidth), or PSK250R (1/2 speed of
PSK250 but far more robust and same bandwidth).

Please note that we successfully use a 500Hz CW filter with PSK500 and
PSK500R if you like to use one, which I would recommend if you have
one in the radio.

Hope this helps,

Best 73's,

John

On , barkerg@xxxxxxxxxxxxx wrote:
> John: The Canadian regulations don't mention baud rate, only a maximum
>
> bandwidth of 1 KHz on 30m and 6 KHz on most other HF bands as per the
>
> attached document. I will try Paul's fldigi upgrade suggestion first.
>
>
>
> Thanks,
>
> Gary

Other related posts: