Can you not use VOX on the 7000? This is a hamlib problem, may be there is info on the hamlib mailing list? Rein -----Ursprüngliche Nachricht----- Von: "Klaus Lohmann" <dl4oah@xxxxxxxxxx> Gesendet: May 6, 2011 5:48:05 PM An: pskmail@xxxxxxxxxxxxx Betreff: [pskmail] Scanning Server >Hi. > >I'm still trying to set up a scanning server. Rig is Icom IC-7000. > >$rigtype = 360; >$scanner = "F"; >Frequencies change according to freqs.txt, BUT RTS and CTS are switched >on and stay on. >This happens with fldigi set to Rigctl or Hamlib. >Same if PTT via CAT command is set. I think, in this case nothing >should happen to RTS/CTS. > >I would prefer switching memories, but memory numbers instead of >frequencies don't work at all. Possibly this is due to the fact, that >memories of IC-7000 are organized in groups. > >73, Klaus DL4OAH > > >