I also use 1500 Hz for the 7200, only way to get a 600 Hz band pass on SSB. Rein >Thank you Rein, will try later. > >VOX is OK with the K3, IC-7000 will not use it together with DataIn, >only with Mic. > >I use 1500 Hz offset to stay in the middle of the filter passband (2100 >Hz, DSP 600Hz) and to avoid passband shift. > >73, Klaus > > >Am 11.05.2011 10:35, schrieb Rein Couperus: >> Klaus, >> >> Hamlib for K3 seems to be broken, use the K2 driver: >> I use VOX instead of PTT. >> This works: >> >> rigctl -m 221 -r /dev/ttyUSB0 -s 4800 >> >> Rig command: f >> Frequency: 10146000 >> 73, >> >> Rein PA0R >>> Trying K3 now. $rigtype 229, $rigrate = 4800, $scanner = "F". See log below. >>> >>> $scanner ="M" does not work either, although that woud keep filter and >>> antenna settings. >>> >>> 73, Klaus >>> >>> >>> kl@esprimo:~$ pskmail_server >>> >>> ### Server v. Pskmail_server 1.0.43. (C) 2010 PA0R >>> 14:07 UTC May-10-2011: Program start >>> 14:07 UTC May-10-2011: Connected to erfurt.aprs2.net port 1314 >>> Scanning: 7042000,10147000,3589000,3589000,3589000, >>> Offset = 0 minute(s) >>> 14:07 UTC May-10-2011: >>> Listening to the radio >>> 7042000,10147000,3589000,3589000,3589000, >>> PSK500R,PSK500R,PSK500R,PSK500R,PSK500R, >>> >>> kenwood_transaction: Command is not correctly terminated 'IF00010145500 ' >>> kenwood_transaction: wrong reply 45 for command IF >>> kenwood_transaction: Command is not correctly terminated '45500' >>> kenwood_transaction: Command is not correctly terminated '0001' >>> kenwood_set_freq: unsupported VFO 536870912 >>> 14:08 UTC May-10-2011: >>> Send>APRS-IS:DL4OAH-8>PSKAPR:@101408z5227.75NP00944.50E&PSKmail 1.0.43 >>> >>> kenwood_transaction: wrong reply 45 for command IF >>> kenwood_transaction: wrong reply MD for command IF >>> kenwood_transaction: Command is not correctly terminated 'IF0' >>> kenwood_transaction: Command is not correctly terminated '02' >>> kenwood_set_freq: unsupported VFO 536870912 >>> >> >