Thank you Rein, will try later.VOX is OK with the K3, IC-7000 will not use it together with DataIn, only with Mic.
I use 1500 Hz offset to stay in the middle of the filter passband (2100 Hz, DSP 600Hz) and to avoid passband shift.
73, Klaus Am 11.05.2011 10:35, schrieb Rein Couperus:
Klaus, Hamlib for K3 seems to be broken, use the K2 driver: I use VOX instead of PTT. This works: rigctl -m 221 -r /dev/ttyUSB0 -s 4800Rig command: fFrequency: 10146000 73, Rein PA0RTrying K3 now. $rigtype 229, $rigrate = 4800, $scanner = "F". See log below. $scanner ="M" does not work either, although that woud keep filter and antenna settings. 73, Klaus kl@esprimo:~$ pskmail_server ### Server v. Pskmail_server 1.0.43. (C) 2010 PA0R 14:07 UTC May-10-2011: Program start 14:07 UTC May-10-2011: Connected to erfurt.aprs2.net port 1314 Scanning: 7042000,10147000,3589000,3589000,3589000, Offset = 0 minute(s) 14:07 UTC May-10-2011: Listening to the radio 7042000,10147000,3589000,3589000,3589000, PSK500R,PSK500R,PSK500R,PSK500R,PSK500R, kenwood_transaction: Command is not correctly terminated 'IF00010145500 ' kenwood_transaction: wrong reply 45 for command IF kenwood_transaction: Command is not correctly terminated '45500' kenwood_transaction: Command is not correctly terminated '0001' kenwood_set_freq: unsupported VFO 536870912 14:08 UTC May-10-2011: Send>APRS-IS:DL4OAH-8>PSKAPR:@101408z5227.75NP00944.50E&PSKmail 1.0.43 kenwood_transaction: wrong reply 45 for command IF kenwood_transaction: wrong reply MD for command IF kenwood_transaction: Command is not correctly terminated 'IF0' kenwood_transaction: Command is not correctly terminated '02' kenwood_set_freq: unsupported VFO 536870912