[orcachat] Re: Saturday morning flying?

  • From: Leslie & Richard <lehman-pearsall@xxxxxxxxxxxx>
  • To: orcachat@xxxxxxxxxxxxx
  • Date: Sun, 15 Sep 2019 09:42:57 -0700

Hi guys,
I put a gallon of 40 to 1 2 stroke mix in the storage shed with the tiny ORCA 
weed-eater.  

Joe, glad you spotted the giant wasp nest before they spotted you.

I will bring my electric chain saw on Monday.

Tom, are you bringing your contest plane to fly?

Thanks Rick M and Rick M.  for parts to get my young neighbor’s plane ready to 
fly.

He was thrilled to don safety goggles and blue gloves  when he  took the .049 
engine apart and cleaned out the dried  castor oil and freed up the reed valve. 
 When reassembled the engine turned over with a nice “pop” sound.  We fixed the 
broken wire on the RCVR antenna and soldered the broken wire back on the XMTR 
battery. Unfortunately the old battery did not take a charge but William’s dad 
is going to order a new battery.  My buddy Duane gave me a Spectrum 5 ch XMTR 
as plan B if we can not get the old gold Futaba (ch 24) going again.

Next week we will work on the broken rudder and horizontal stabilizer and the 
plane should be mostly ready to fly.

We are now looking for an .o49 glow clip to light up the special Cox glow plug. 
 Anybody have one they can donate to the cause?



Hope to see you Monday,

Richard P.

On Sep 14, 2019, at 3:29 PM, Joseph Young (Redacted sender "tarmac65" for 
DMARC) <dmarc-noreply@xxxxxxxxxxxxx> wrote:

Jake, 
I think it would be ideal for clearing a path along the west side of the 
fence line We’re going to need some access there for sure,  but in the thick 
of the grove, the saw seems to be the way to go.

Joe

On Sep 14, 2019, at 3:18 PM, Jake Boyd <dyob42@xxxxxxxxx 
<mailto:dyob42@xxxxxxxxx>> wrote:

Rick M,

Maybe we could rent a proper trimmer with blade?

Jake

Sent from EKAJDYOB

On Sep 14, 2019, at 12:43, <ORCA@xxxxxxxxxxxxx <mailto:ORCA@xxxxxxxxxxxxx>> 
<ORCA@xxxxxxxxxxxxx <mailto:ORCA@xxxxxxxxxxxxx>> wrote:

Looks like Monday is a good day for tree cutting and flying.  Tuesday’s 
float fly doesn’t look too promising.
 
Rick
 
From: George Moser (Redacted sender "mosercat17" for DMARC) 
<mailto:dmarc-noreply@xxxxxxxxxxxxx>
Sent: Saturday, September 14, 2019 11:40 AM
To: orcachat@xxxxxxxxxxxxx <mailto:orcachat@xxxxxxxxxxxxx>
Subject: [orcachat] Re: Saturday morning flying?
 
Monday am will be at Trigger. Join me if not wet.
G

Sent from Yahoo Mail on Android 
<https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature>
On Sat, Sep 14, 2019 at 10:24 AM, Paul Below
<dmarc-noreply@xxxxxxxxxxxxx <mailto:dmarc-noreply@xxxxxxxxxxxxx>> wrote:
I was at the field early and got my test flights completed.  The wind was a 
little bouncy at 8 am but not too bad.
 
Paul

Sent from Yahoo Mail on Android 
<https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature>
 
On Fri, Sep 13, 2019 at 8:18 PM, Paul Below
<dmarc-noreply@xxxxxxxxxxxxx <mailto:dmarc-noreply@xxxxxxxxxxxxx>> wrote:
I may go early to try to get flight in before wind comes up.
 
Paul
 
On Sep 13, 2019 6:43 PM, Jake Boyd <dyob42@xxxxxxxxx 
<mailto:dyob42@xxxxxxxxx>> wrote:
I’m kinda caught up on my garage project and wondering I’d anybody is 
flying in the morning???

Jake

Sent from EKAJDYOB

 


Other related posts: