Joe, there is a can of hornet/wasp killer in the port-a-potty. Also in the
storage shed is another can of the stuff. Can you access the trees on the
east side of the fence?
Rick
From: Joseph Young (Redacted sender "tarmac65" for DMARC)
Sent: Saturday, September 14, 2019 3:21 PM
To: orcachat@xxxxxxxxxxxxx
Subject: [orcachat] Re: Saturday morning flying?
On Sep 14, 2019, at 3:14 PM, Joseph Young <tarmac65@xxxxxx> wrote:
I decided to do a little more cutting at the field today. I think we are
about half way through the grove now. It’s looking like we may have to take out
a pretty large portion of the fence out to get the trees out of there. it
appears the bulk of the grove is on the east side of the fence. Also do we have
any hornet killer on hand? There’s a wasp nest hanging in a tree where I
stopped today. pretty much the reason I stopped. about the size of a basket
ball.
Have a great weekend!
Joe
<IMG_3012.jpeg>
On Sep 14, 2019, at 12:42 PM, <ORCA@xxxxxxxxxxxxx> <ORCA@xxxxxxxxxxxxx>
wrote:<IMG_3011.jpeg><IMG_3009.jpeg>
Jake, we just missed each other, I left at 9:09.
I was going to put a blade on my trimmer to cut out the blackberries but
the parts guy at Kitsap Tractor said it wouldn’t work too well. If the
blackberries were new and small size the blade could work but on established
vines it doesn’t a good job. Also, my trimmer has a flexible drive shaft. The
parts guy said that the blade on established blackberries would cause too much
torque and could damage the flexible drive shaft. He said I would need a high
end commercial grade trimmer with a solid drive shaft.
Rick
From: Jake Boyd
Sent: Saturday, September 14, 2019 11:35 AM
To: orcachat@xxxxxxxxxxxxx
Subject: [orcachat] Re: Saturday morning flying?
I got to the field about 9:12......again, nobody there😀. A few showers and
a bit of wind so I declined to fly.
I did donate and drop off the Stihl chainsaw in the storage container for
anybody to check out to determine if it operates OK. It is about 15 years old
but virtually new and may need a little TLC in the carb department in case of
any possible old gas varnish.
I met Joe Young coming in as I was leaving and he also left his chainsaw
for future tree cutting.
He has surveyed the alder patch and feels the biggest problem is the
blackberry vines...so thick you can’t work on the trees. A problem to
solve......even if you cut the base of the vines the balled up vines are
intertwined among the alders so tight you can’t drag them out of the way....at
least not by hand.....might require some kind of machinery.
Jake
Sent from EKAJDYOB
On Sep 14, 2019, at 10:24, Paul Below (Redacted sender "paulbelow" for
DMARC) <dmarc-noreply@xxxxxxxxxxxxx> wrote:
I was at the field early and got my test flights completed. The wind was
a little bouncy at 8 am but not too bad.
Paul
Sent from Yahoo Mail on Android
On Fri, Sep 13, 2019 at 8:18 PM, Paul Below
<dmarc-noreply@xxxxxxxxxxxxx> wrote:
I may go early to try to get flight in before wind comes up.
Paul
On Sep 13, 2019 6:43 PM, Jake Boyd <dyob42@xxxxxxxxx> wrote:
I’m kinda caught up on my garage project and wondering I’d anybody is
flying in the morning???
Jake
Sent from EKAJDYOB