[optimal] Re: Topcon 50VT
- From: "Tom Steele" <TSteele@xxxxxxxxxxxxxx>
- To: <optimal@xxxxxxxxxxxxx>
- Date: Tue, 20 Nov 2012 15:51:20 -0500
Upgrade before it crumbles into dust
Thank You,
Tom Steele, CRA
Midwest Eye Institute
200 West 103rd Street
Indianapolis, Indiana 46290
317.817.1018
tsteele@xxxxxxxxxxxxxx
CONFIDENTIALITY NOTICE:
This message is intended only for the use of the individual or entity to
which it is addressed and may contain information that is confidential
and/or privileged. If the reader of this message is not the intended
recipient, you are hereby notified that any dissemination, distribution or
copying of this communication is strictly prohibited. If you have received
this communication in error, please notify us immediately by telephone and
return the original message to us at the above email address
From: optimal-bounce@xxxxxxxxxxxxx [mailto:optimal-bounce@xxxxxxxxxxxxx] On
Behalf Of Breit, Peter
Sent: Tuesday, November 20, 2012 3:37 PM
To: optimal@xxxxxxxxxxxxx
Subject: [optimal] Topcon 50VT
Colleagues,
I need help with an old 50VT problem. The camera is
old, the problem is new.. The little slider near the top on the left side
which changes from Normal to Plus (+) and Minus (-) and Anterior (A) is
stuck in the Minus position.
Lately it has been extremely difficult to move, why ? Maybe it got bend? I
pulled it all out to "A" but could not slide it back. Something "clicked"
sounded like something fell in the way, preventing it from sliding back in.
A local dealer rep tried to fix it but was not able
to solve the problem.
Did anyone of you experienced a similar fate and was able to fix it ?
Any advise is very much appreciated..
Thank you
Peter
Peter L. Breit, CRA.
Director Ophthalmic Services
The Lankenau Hospital & Bryn Mawr Hospital
484-476-3338
484-476-8206 fax
484-437-3262 mobile
page 3707
Other related posts:
