okay i'll try 2nd time to find sth useful in ur site ;) On Nov 12, 2007 9:59 PM, flipstar@xxxxxxx <flipstar@xxxxxxx> wrote: > Default User schrieb: > > is there any manual? > > Did you (at leased) visited my side there are pictures and text > explaining how to build a serial cable. > > I'm getting annoyed in the way this project runs there are very little > people that try to give things. > > What happend to: > > - the thttpd vserver stuff > - openvpn howto > - mediaplayer howto's and bin files > - somebody wanted to rewrite the compile howto > - etc etc etc > > Guess we have to much of two sorts of people: > > those how can fix problems but don't share there knowledge > and those who have little knowledge and are not even willing to read. > > This SUCKS > > @Default User don't take this to personal I wanted to say this for quite > some time. > > -- > flip > > > > > > On Nov 12, 2007 7:34 PM, Alfred Bruckner <alfred.bruckner@xxxxxx> wrote: > >> Hi, > >> there is a driver between NAS an RS232 required because voltage levels do > >> not match. If you connect directly you will destroy the hardware. > >> Maybe you find some handy data cable. Some of them could be used. > >> > >> Alfred > >> ----------------------- > >> > >> > >> flipstar.net/myfaq > >> > >> Am Montag, den 12.11.2007, 19:07 +0200 schrieb Default User: > >>> okay, but raidsonic are not shipping to my country, where i can find > >>> image of that serial cable? > >>> > >>> On Nov 12, 2007 5:06 PM, Alfred Bruckner <alfred.bruckner@xxxxxx> wrote: > >>>> Hi Kenshin, > >>>> You said you changed hdd. > >>>> Was your NAS working in NAS mode before changing the drive? > >>>> > >>>> Do you have a serial cable? You could request one at raidsonic. > >>>> If it is some result from a previous firmware flash I think you are in a > >> bad > >>>> situation - look starting from: > >>>> //www.freelists.org/archives/nas-2000/09-2007/msg00015.html > >>>> > >>>> geetings, > >>>> Alfred > >>>> > >>>> -------------------------- > >>>> > >>>> > >>>> Hi Alfred, > >>>> > >>>> I just maked two photos: > >>>> Front: http://www.photocrib.net/is.php?i=59981&img=IMAG0165.JPG > >>>> Back: http://www.PhotoCrib.net/is.php?i=59982&img=IMAG0166.JPG > >>>> > >>>> Network is working good :) > >>>> > >>>> i thing where is problem with firmare, is there and way to reflash it > >>>> without bootloader or WebUI? > >>>> > >>>> > >>>> On Nov 12, 2007 4:02 PM, Alfred Bruckner <alfred.bruckner@xxxxxx> wrote: > >>>>> Hi Kenshin, > >>>>> > >>>>> Is the "NAS" LED on if you connect with the network cable? > >>>>> If not, it is not switched on or there is some problem with the > >> network > >>>>> cable. > >>>>> > >>>>> kind regards, > >>>>> Alfred > >>>>> > >>>>> ----------------------------------------- > >>>>> > >>>>> Hello everybody, > >>>>> I just changed hdd, and have some problems: > >>>>> 1. I cannot reach bootloader > >>>>> 2. I cannot find nas with nas finder. > >>>>> > >>>>> C:\Documents and Settings\Default>telnet 192.168.2.71 9000 > >>>>> Connecting To 192.168.2.71...Could not open connection to the host, on > >>>> port > >>>>> 9000 > >>>>> : Connect failed > >>>>> > >>>>> I tried connect with FlashStart too, nothing.. > >>>>> > >>>>> My nas ip was 192.168.2.113 (Web UI etc.) > >>>>> > >>>>> and now i see that ip is connected to dhcp: > >>>>> > >>>>> Host Name IP Address MAC Address Expired Time > >>>>> 192.168.2.113 00-50-C2-2B-33-22 Mon Nov > >>>>> 19 13:18:49 2007 > >>>>> > >>>>> But when i tried to ping it: > >>>>> > >>>>> C:\Documents and Settings\Default>ping 192.168.2.113 > >>>>> > >>>>> Pinging 192.168.2.113 with 32 bytes of data: > >>>>> > >>>>> Request timed out. > >>>>> Request timed out. > >>>>> Request timed out. > >>>>> Request timed out. > >>>>> > >>>>> Ping statistics for 192.168.2.113: > >>>>> Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), > >>>>> > >>>>> Nas is working on usb mode, i want to know what i should to do to find > >>>>> where is the problem with nas mode. > >>>>> Can anybody help me? > >>>>> > >>>>> Waiting for reply.. > >>>>> > >>>>> Best Regards, > >>>>> Kenshin > >>>>> > >>>>> > >>>>> > >>>>> > >>>> > >>>> > >>>> > >> > >> > >> > >> > > > >