is there any manual? On Nov 12, 2007 7:34 PM, Alfred Bruckner <alfred.bruckner@xxxxxx> wrote: > Hi, > there is a driver between NAS an RS232 required because voltage levels do > not match. If you connect directly you will destroy the hardware. > Maybe you find some handy data cable. Some of them could be used. > > Alfred > ----------------------- > > > flipstar.net/myfaq > > Am Montag, den 12.11.2007, 19:07 +0200 schrieb Default User: > > okay, but raidsonic are not shipping to my country, where i can find > > image of that serial cable? > > > > On Nov 12, 2007 5:06 PM, Alfred Bruckner <alfred.bruckner@xxxxxx> wrote: > > > Hi Kenshin, > > > You said you changed hdd. > > > Was your NAS working in NAS mode before changing the drive? > > > > > > Do you have a serial cable? You could request one at raidsonic. > > > If it is some result from a previous firmware flash I think you are in a > bad > > > situation - look starting from: > > > //www.freelists.org/archives/nas-2000/09-2007/msg00015.html > > > > > > geetings, > > > Alfred > > > > > > -------------------------- > > > > > > > > > Hi Alfred, > > > > > > I just maked two photos: > > > Front: http://www.photocrib.net/is.php?i=59981&img=IMAG0165.JPG > > > Back: http://www.PhotoCrib.net/is.php?i=59982&img=IMAG0166.JPG > > > > > > Network is working good :) > > > > > > i thing where is problem with firmare, is there and way to reflash it > > > without bootloader or WebUI? > > > > > > > > > On Nov 12, 2007 4:02 PM, Alfred Bruckner <alfred.bruckner@xxxxxx> wrote: > > > > Hi Kenshin, > > > > > > > > Is the "NAS" LED on if you connect with the network cable? > > > > If not, it is not switched on or there is some problem with the > network > > > > cable. > > > > > > > > kind regards, > > > > Alfred > > > > > > > > ----------------------------------------- > > > > > > > > Hello everybody, > > > > I just changed hdd, and have some problems: > > > > 1. I cannot reach bootloader > > > > 2. I cannot find nas with nas finder. > > > > > > > > C:\Documents and Settings\Default>telnet 192.168.2.71 9000 > > > > Connecting To 192.168.2.71...Could not open connection to the host, on > > > port > > > > 9000 > > > > : Connect failed > > > > > > > > I tried connect with FlashStart too, nothing.. > > > > > > > > My nas ip was 192.168.2.113 (Web UI etc.) > > > > > > > > and now i see that ip is connected to dhcp: > > > > > > > > Host Name IP Address MAC Address Expired Time > > > > 192.168.2.113 00-50-C2-2B-33-22 Mon Nov > > > > 19 13:18:49 2007 > > > > > > > > But when i tried to ping it: > > > > > > > > C:\Documents and Settings\Default>ping 192.168.2.113 > > > > > > > > Pinging 192.168.2.113 with 32 bytes of data: > > > > > > > > Request timed out. > > > > Request timed out. > > > > Request timed out. > > > > Request timed out. > > > > > > > > Ping statistics for 192.168.2.113: > > > > Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), > > > > > > > > Nas is working on usb mode, i want to know what i should to do to find > > > > where is the problem with nas mode. > > > > Can anybody help me? > > > > > > > > Waiting for reply.. > > > > > > > > Best Regards, > > > > Kenshin > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >