[nas-2000] Re: NAS problem
- From: "Alfred Bruckner" <alfred.bruckner@xxxxxx>
- To: <nas-2000@xxxxxxxxxxxxx>
- Date: Mon, 12 Nov 2007 18:34:24 +0100
Hi,
there is a driver between NAS an RS232 required because voltage levels do
not match. If you connect directly you will destroy the hardware.
Maybe you find some handy data cable. Some of them could be used.
Alfred
-----------------------
flipstar.net/myfaq
Am Montag, den 12.11.2007, 19:07 +0200 schrieb Default User:
> okay, but raidsonic are not shipping to my country, where i can find
> image of that serial cable?
>
> On Nov 12, 2007 5:06 PM, Alfred Bruckner <alfred.bruckner@xxxxxx> wrote:
> > Hi Kenshin,
> > You said you changed hdd.
> > Was your NAS working in NAS mode before changing the drive?
> >
> > Do you have a serial cable? You could request one at raidsonic.
> > If it is some result from a previous firmware flash I think you are in a
bad
> > situation - look starting from:
> > //www.freelists.org/archives/nas-2000/09-2007/msg00015.html
> >
> > geetings,
> > Alfred
> >
> > --------------------------
> >
> >
> > Hi Alfred,
> >
> > I just maked two photos:
> > Front: http://www.photocrib.net/is.php?i=59981&img=IMAG0165.JPG
> > Back: http://www.PhotoCrib.net/is.php?i=59982&img=IMAG0166.JPG
> >
> > Network is working good :)
> >
> > i thing where is problem with firmare, is there and way to reflash it
> > without bootloader or WebUI?
> >
> >
> > On Nov 12, 2007 4:02 PM, Alfred Bruckner <alfred.bruckner@xxxxxx> wrote:
> > > Hi Kenshin,
> > >
> > > Is the "NAS" LED on if you connect with the network cable?
> > > If not, it is not switched on or there is some problem with the
network
> > > cable.
> > >
> > > kind regards,
> > > Alfred
> > >
> > > -----------------------------------------
> > >
> > > Hello everybody,
> > > I just changed hdd, and have some problems:
> > > 1. I cannot reach bootloader
> > > 2. I cannot find nas with nas finder.
> > >
> > > C:\Documents and Settings\Default>telnet 192.168.2.71 9000
> > > Connecting To 192.168.2.71...Could not open connection to the host, on
> > port
> > > 9000
> > > : Connect failed
> > >
> > > I tried connect with FlashStart too, nothing..
> > >
> > > My nas ip was 192.168.2.113 (Web UI etc.)
> > >
> > > and now i see that ip is connected to dhcp:
> > >
> > > Host Name IP Address MAC Address Expired Time
> > > 192.168.2.113 00-50-C2-2B-33-22 Mon Nov
> > > 19 13:18:49 2007
> > >
> > > But when i tried to ping it:
> > >
> > > C:\Documents and Settings\Default>ping 192.168.2.113
> > >
> > > Pinging 192.168.2.113 with 32 bytes of data:
> > >
> > > Request timed out.
> > > Request timed out.
> > > Request timed out.
> > > Request timed out.
> > >
> > > Ping statistics for 192.168.2.113:
> > > Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),
> > >
> > > Nas is working on usb mode, i want to know what i should to do to find
> > > where is the problem with nas mode.
> > > Can anybody help me?
> > >
> > > Waiting for reply..
> > >
> > > Best Regards,
> > > Kenshin
> > >
> > >
> > >
> > >
> >
> >
> >
> >
Other related posts:
