[modeleng] Re: coocking oil.
- From: "Clif Walker" <clif.gwr@xxxxxxxxxxxxxx>
- To: <modeleng@xxxxxxxxxxxxx>
- Date: Fri, 29 Oct 2004 09:36:17 +0100
Hi All,
Re exhaust tests
I think that Jeff can correct me if I am wrong but I was talking to a
motorist in Canada the other year and he told me that only cars in Cities
had their exhausts checked.So the trick was that if you had an older car you
kept it registered at an address in the countryside.
Regards
Clif
----- Original Message -----
From: "Ronald" <Ron@xxxxxxxxxxxxxxxxxxxxxxxxxx>
To: <modeleng@xxxxxxxxxxxxx>
Sent: Thursday, October 28, 2004 8:44 PM
Subject: [modeleng] Re: coocking oil.
> I belive 1`st MOT after 3 years then each year.
> ----- Original Message -----
> From: "Patrick Coppens" <sb286643@xxxxxxxxx>
> To: <modeleng@xxxxxxxxxxxxx>
> Sent: Wednesday, October 27, 2004 2:36 PM
> Subject: [modeleng] Re: coocking oil.
>
>
> Is it still so, that a car only has to have ts first MOT after 10 years
> in the UK ?
> Over here, you have to go every year to the MOT centre, where the
> analyse the exhaust fumes
> and the are real fascist about that !
> I presume that the UK has some more sensible laws on the matter....
> Patrick
> Allen Messer wrote:
>
> >Is "exhaust odor" covered by the anti-pollution laws?
> >
> >Al Messer
> >--- Patrick Coppens <sb286643@xxxxxxxxx> wrote:
> >
> >
> >
> >>Alan,
> >>They actually sell that biodiesel stuff here,but is
> >>even more costly
> >>then real diesel,but
> >>it is easy to make at home,
> >>Some years ago, I ran a salvaged Turbo diesel engine
> >>from a BMW (that
> >>couldn't stop,when that wall ran across the road)
> >>for some time to generate power, and it worked well.
> >>If you clean it well and siphon it the way it
> >>should be done, than the
> >>smell should be minimal....
> >>Patrick
> >>
> >>alanjstepney wrote:
> >>
> >>
> >>
> >>>I know a guy here who has run his diesel car on
> >>>
> >>>
> >>waste oil from his local
> >>
> >>
> >>>"chippy" for many years.
> >>>As he drives up the road it smells mike a mobile
> >>>
> >>>
> >>fish-and-chip shop, but he
> >>
> >>
> >>>has got away with it so far.
> >>>
> >>>alan@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> >>>
> >>>www.alanstepney.info
> >>>Model Engineering, Steam Engine, and Railway
> >>>
> >>>
> >>technical pages.
> >>
> >>
> >>>----- Original Message -----
> >>>From: "Patrick Coppens" <develop@xxxxxxxxx>
> >>>To: <modeleng@xxxxxxxxxxxxx>
> >>>Sent: Tuesday, October 26, 2004 3:23 PM
> >>>Subject: [modeleng] coocking oil.
> >>>
> >>>
> >>>
> >>>Hi,
> >>>
> >>>If you have a supply of coocking oil, it is not
> >>>
> >>>
> >>difficult to make that
> >>
> >>
> >>>into 'bio-diesel'
> >>>This removes the glycerin, and makes it into a fuel
> >>>
> >>>
> >>that burns cleaner
> >>
> >>
> >>>(less smoke etc..)
> >>>and you can even run a car on it !!!
> >>>
> >>>Patrick
> >>>
> >>>MODEL ENGINEERING DISCUSSION LIST.
> >>>
> >>>To UNSUBSCRIBE from this list, send a blank email
> >>>
> >>>
> >>to,
> >>
> >>
> >>>modeleng-request@xxxxxxxxxxxxx with the word
> >>>
> >>>
> >>"unsubscribe" in the subject line.
> >>
> >>
> >>>
> >>>
> >>>
> >>>
> >>MODEL ENGINEERING DISCUSSION LIST.
> >>
> >>To UNSUBSCRIBE from this list, send a blank email
> >>to,
> >>modeleng-request@xxxxxxxxxxxxx with the word
> >>"unsubscribe" in the subject line.
> >>
> >>
> >>
> >
> >
> >
> >
> >__________________________________
> >Do you Yahoo!?
> >Y! Messenger - Communicate in real time. Download now.
> >http://messenger.yahoo.com
> >MODEL ENGINEERING DISCUSSION LIST.
> >
> >To UNSUBSCRIBE from this list, send a blank email to,
> >modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject
> line.
> >
> >
> >
> >
>
>
> MODEL ENGINEERING DISCUSSION LIST.
>
> To UNSUBSCRIBE from this list, send a blank email to,
> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject
> line.
>
> MODEL ENGINEERING DISCUSSION LIST.
>
> To UNSUBSCRIBE from this list, send a blank email to,
> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject
line.
MODEL ENGINEERING DISCUSSION LIST.
To UNSUBSCRIBE from this list, send a blank email to,
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.
Other related posts:
