[modeleng] Re: Boiler blues
- From: "shep" <shep.28@xxxxxxxxxxxx>
- To: <modeleng@xxxxxxxxxxxxx>
- Date: Mon, 19 Sep 2005 09:13:35 +0100
The interiors of ovens are usually made of heavily stove-enamelled steel or
of stainless steel.
I wonder what the effect of oven cleaners would have on copper or steel?
Suggest a trial run on scrap!
Cheers! Hubert
----- Original Message -----
From: "Allen Messer" <al_messer@xxxxxxxxx>
To: <modeleng@xxxxxxxxxxxxx>
Sent: Sunday, September 18, 2005 10:25 PM
Subject: [modeleng] Re: Boiler blues
> Uuummmmmm! Good question, and I do not know the
> answer. I suppose that both of these are the result
> of the Carbon in the oils/carbohydrates being "cooked
> out" and left as a deposit, so your idea may well have
> merit.
>
> Al
>
> --- Tony Wells <oaksfield@xxxxxxxxxxxxxxx> wrote:
>
>> A late thought on this, but assuming that boiler
>> crud is mostly baked on
>> carbon, how about one of thse "sooper dooper" spray
>> on oven cleaners that
>> are supposed to dissolve away baked on oven carbon?
>> What is the difference,
>> if any, between the two scenarios?
>>
>> Tony, "I will build a boiler someday", Wells.
>>
>>
>> ----- Original Message -----
>> From: "Barrie Purslow" <bpduo@xxxxxxxxxxxxx>
>> To: "Model Engineering List"
>> <modeleng@xxxxxxxxxxxxx>
>> Sent: Sunday, September 18, 2005 8:08 PM
>> Subject: [modeleng] Re: Boiler blues
>>
>>
>> > Hi,
>> >
>> > Just a quick thanks to all of you who posted a
>> reply to my query on
>> > cleaning
>> > boiler tubes. I'm just off for a week, maybe I'll
>> try out a few ideas on
>> > the
>> > petticoat pipes (which were 50% blocked!) when I
>> get back or maybe I'll
>> > leave well alone!
>> > Thanks again.
>> >
>> > Barrie
>> >
>> > MODEL ENGINEERING DISCUSSION LIST.
>> >
>> > To UNSUBSCRIBE from this list, send a blank email
>> to,
>> > modeleng-request@xxxxxxxxxxxxx with the word
>> "unsubscribe" in the subject
>> > line.
>>
>> MODEL ENGINEERING DISCUSSION LIST.
>>
>> To UNSUBSCRIBE from this list, send a blank email
>> to,
>> modeleng-request@xxxxxxxxxxxxx with the word
>> "unsubscribe" in the subject line.
>>
>
>
>
>
>
> ______________________________________________________
> Yahoo! for Good
> Donate to the Hurricane Katrina relief effort.
> http://store.yahoo.com/redcross-donate3/
>
> MODEL ENGINEERING DISCUSSION LIST.
>
> To UNSUBSCRIBE from this list, send a blank email to,
> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject
> line.
>
MODEL ENGINEERING DISCUSSION LIST.
To UNSUBSCRIBE from this list, send a blank email to,
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.
Other related posts:
