I haven't done this for a while, but I think that you have it backwards. Local echo should be off. Assign arps to only part 1. In Sonar, you arrow to a track, hit record in Sonar, and play the arp. Now, assign a different arp to part 1, arrow to another track in Sonar, and record again. Sonar records whatever comes in over channel 1 to the current track by default, so using arps on other Motif XS parts won't do you any good. Using multiple input channels in Sonar is a complex procedure that you don't want to figure out if you don't have to. Bryan -----Original Message----- From: moaccess-bounce@xxxxxxxxxxxxx [mailto:moaccess-bounce@xxxxxxxxxxxxx] On Behalf Of auriuxxas Sent: Monday, May 26, 2008 2:13 AM To: MoAccess@xxxxxxxxxxxxx Subject: Re: [MoAccess] recording arpeggios with sonar Hi Bryan, The problem is, that i want to record arpeggiator data in sonar as midi data, and i want to get notes on the midi track from motif arpeggiator. Sonar records only one note so i must to prevent from direct key pressis and record only arpeggiator of motif xs. What i do is folowing: Local control on with melas mix editor midi sync is switched to midi asign arpeggios to each part (part1/4) with Melas editors prevent sonar that it doesn't sent back midi signal to motif and sonar doesn't record arpeggios after this stepp. It records only one note press, but not notes from arpeggiator. I red, that arp out switch should be turned on, so the question is can i turn this switch with melas mix editor, if yes, than how? Question 2 is, maybe i miss something in this procedure?Š¶”‰~¯¯¾·2qŠNjŹ–¢¢¯{rz®2q–¾·~–²ž·i ���y,�����-���~�譹b��0����+"� 02�q�,�w�N�!jxʋ��+-��b�{���{�r�z����^2�q�,�+-�+"�0~���+-����X����i��