You can cascade i2c On Tue, Feb 25, 2014 at 4:58 AM, <farhanbox@xxxxxxxxx> wrote: > Sunil, > The I2C interface is already being used for the Si570. Yes, it is good > idea to draw out the lines to interface is to other things. > > - f > Sent from BlackBerry® on Airtel > ------------------------------ > *From: * Sunil Thomas Thonikuzhiyil <vu2swx@xxxxxxxxx> > *Sender: * minima-bounce@xxxxxxxxxxxxx > *Date: *Tue, 25 Feb 2014 01:04:27 +0530 > *To: *<minima@xxxxxxxxxxxxx> > *ReplyTo: * minima@xxxxxxxxxxxxx > *Subject: *[minima] Re: Saving arduino lines > > Farhan, > We can even think of two extra pads on the i2c lines of the digital > board. and leave the digital board design as it is. If any one wants to > free up lines they can use the current lcd lines and wire an I2c module. > The software needs only a slight change. > Most of the I2c LCD adapter are based on > PCF8574 > <http://www.nxp.com/documents/data_sheet/PCF8574.pdf> > > I think these adapters are widely available on ebay.com. I find one > listing even on ebay.in for Rs 250. > > Sunil > > > On Tue, Feb 25, 2014 at 12:34 AM, hcker2000 <hcker2000@xxxxxxxxx> wrote: > >> I am new but the I2C lcd seems like a great option to free up some lines. >> The other option might be a shift register. >> >> >> On Mon, Feb 24, 2014 at 1:59 PM, <farhanbox@xxxxxxxxx> wrote: >> >>> Sunil, >>> >>> The I2C boards are not uniformly available everywhere. The only boards >>> available are the 16x2 lcd boards, they have a consistent interface and a >>> stable arduni library >>> - f >>> Sent from BlackBerry® on Airtel >>> ------------------------------ >>> *From: * Sunil Thomas Thonikuzhiyil <vu2swx@xxxxxxxxx> >>> *Sender: * minima-bounce@xxxxxxxxxxxxx >>> *Date: *Tue, 25 Feb 2014 00:23:24 +0530 >>> *To: *<minima@xxxxxxxxxxxxx> >>> *ReplyTo: * minima@xxxxxxxxxxxxx >>> *Subject: *[minima] Saving arduino lines >>> >>> Dear Farhan, >>> >>> The present design of digital board uses 6 Arduino lines for LCD >>> alone. >>> Why don't we use an I2c LCD instead. They are very cheap and the code >>> needs only two line change. I2C lines can be shared with Si570. In effect >>> we will save 6 lines. That will be enough for all future expansions. >>> >>> I am presently using this i2c adapter for all my arduino projects. >>> >>> http://www.aliexpress.com/item/Free-Shipping-New-5V-IIC-I2C-Serial-Interface-Board-Module-For-Arduino-1602-LCD-Display/1080407434.html >>> >>> I got PCB from Sandeep today. I will start building over next >>> weekend. and will post the progress. >>> >>> Sunil ,VU2SWX >>> PhD Scholar >>> Vision and Image processing Lab >>> Dept. of Electrical Engg >>> IIT BOMBAY,India >>> >>> -- >>> >>> >> >> >> >> -- >> Mike "hcker2000" Ashcraft >> http://bigironinteractive.com >> >> <http://www.linkedin.com/in/mikeashcraft> >> > > > > -- > > --