The +5 and +12V would work at18 and 7A On 7/3/05, David Irwin <david.irwin@xxxxxxxxxxxxxx> wrote: > They vary with different manufacturers. Here is a typical 230 watt ps. > > DC OUTPUT +3.3V +5V +12V -12V -5V +5VSB > 230W Max > Combined > Watts 10A 18A 7A 0.8A 0.8A 2A > 230W > > > David I. > > > > ----- Original Message ----- > From: "Philip Johnson" <oldcoot.phil@xxxxxxxxx> > To: <lektrik_flyers@xxxxxxxxxxxxx> > Sent: Sunday, July 03, 2005 8:16 PM > Subject: [lektrik_flyers] Re: power supplies > > > David, do you have info on the max amperages of the various voltages > on a 250watt supply? > > On 7/3/05, David Irwin <david.irwin@xxxxxxxxxxxxxx> wrote: > > Here are the voltages and colors: > > _______ > > / \ > > | 1 2 3 4 | > > |________| > > > > > > Pin Function > > > > 1 +5 V - Yellow Wire > > 2 Ground - Black Wire > > 3 Ground - Black Wire > > 4 +12 V - Red Wire > > > > David Irwin > > > > > > > > ----- Original Message ----- > > From: "Philip Johnson" <oldcoot.phil@xxxxxxxxx> > > To: "Lektrik_flyers" <lektrik_flyers@xxxxxxxxxxxxx> > > Sent: Sunday, July 03, 2005 11:20 AM > > Subject: [lektrik_flyers] power supplies > > > > > > Hi all > > If you are giong to build a hot wire cutter and need a powrer supply; > > CompUSA is selling an ATX computer supply for $1.99 after rebates > > Starts at $29.99 then instant $7.00 off and $21.00 mail in. I dont > > know how good such a supply is for the purpuse but have read in > > threads that they are used. To work rather well; it would be good to > > have DC outputs of about 12v- 6amp for wing core cutting set ups and > > 5/6v-6amp for fff cutting. I don't know the available outputs on > > these. Some of you computer geeks should know. There are probably a > > lot of free ones laying around if you know where to find them. An AT > > power supply should also work depending on available output V/As. > > Phil > > ___________________________________________________________________________ > > You are a member of the lektrik_flyers listserv. You became a member of > > this listserv by either directly subscribing or being recommended for > > subscription by a fellow member. If you no longer wish to be a member of > > this listserv, please follow the link > > (//www.freelists.org/list/lektrik_flyers) and follow the onscreen > > prompts to be removed from this list. Should this not work for you send > > an > > email to bbeavers57@xxxxxxxxx and supply the email address you wish to > > have > > removed from the listserv, and this will be done at the earliest available > > opportunity. Visit our website at http://users.tcworks.net/~bbeavers/. > > Thank you and we hope you continue to enjoy being a member of the lektrik > > flyers. > > > > ___________________________________________________________________________ > > You are a member of the lektrik_flyers listserv. You became a member of > > this listserv by either directly subscribing or being recommended for > > subscription by a fellow member. If you no longer wish to be a member of > > this listserv, please follow the link > > (//www.freelists.org/list/lektrik_flyers) and follow the onscreen > > prompts to be removed from this list. Should this not work for you send > > an email to bbeavers57@xxxxxxxxx and supply the email address you wish to > > have removed from the listserv, and this will be done at the earliest > > available opportunity. Visit our website at > > http://users.tcworks.net/~bbeavers/. Thank you and we hope you continue > > to enjoy being a member of the lektrik flyers. > > > ___________________________________________________________________________ > You are a member of the lektrik_flyers listserv. You became a member of > this listserv by either directly subscribing or being recommended for > subscription by a fellow member. If you no longer wish to be a member of > this listserv, please follow the link > (//www.freelists.org/list/lektrik_flyers) and follow the onscreen > prompts to be removed from this list. Should this not work for you send an > email to bbeavers57@xxxxxxxxx and supply the email address you wish to have > removed from the listserv, and this will be done at the earliest available > opportunity. Visit our website at http://users.tcworks.net/~bbeavers/. > Thank you and we hope you continue to enjoy being a member of the lektrik > flyers. > > ___________________________________________________________________________ > You are a member of the lektrik_flyers listserv. You became a member of this > listserv by either directly subscribing or being recommended for subscription > by a fellow member. If you no longer wish to be a member of this listserv, > please follow the link (//www.freelists.org/list/lektrik_flyers) and > follow the onscreen prompts to be removed from this list. Should this not > work for you send an email to bbeavers57@xxxxxxxxx and supply the email > address you wish to have removed from the listserv, and this will be done at > the earliest available opportunity. Visit our website at > http://users.tcworks.net/~bbeavers/. Thank you and we hope you continue to > enjoy being a member of the lektrik flyers. > ___________________________________________________________________________ You are a member of the lektrik_flyers listserv. You became a member of this listserv by either directly subscribing or being recommended for subscription by a fellow member. If you no longer wish to be a member of this listserv, please follow the link (//www.freelists.org/list/lektrik_flyers) and follow the onscreen prompts to be removed from this list. Should this not work for you send an email to bbeavers57@xxxxxxxxx and supply the email address you wish to have removed from the listserv, and this will be done at the earliest available opportunity. Visit our website at http://users.tcworks.net/~bbeavers/. Thank you and we hope you continue to enjoy being a member of the lektrik flyers.