[lektrik_flyers] Re: power supplies
- From: Philip Johnson <oldcoot.phil@xxxxxxxxx>
- To: lektrik_flyers@xxxxxxxxxxxxx
- Date: Sun, 3 Jul 2005 20:16:05 -0500
David, do you have info on the max amperages of the various voltages
on a 250watt supply?
On 7/3/05, David Irwin <david.irwin@xxxxxxxxxxxxxx> wrote:
> Here are the voltages and colors:
> _______
> / \
> | 1 2 3 4 |
> |_________|
>
>
> Pin Function
>
> 1 +5 V - Yellow Wire
> 2 Ground - Black Wire
> 3 Ground - Black Wire
> 4 +12 V - Red Wire
>
> David Irwin
>
>
>
> ----- Original Message -----
> From: "Philip Johnson" <oldcoot.phil@xxxxxxxxx>
> To: "Lektrik_flyers" <lektrik_flyers@xxxxxxxxxxxxx>
> Sent: Sunday, July 03, 2005 11:20 AM
> Subject: [lektrik_flyers] power supplies
>
>
> Hi all
> If you are giong to build a hot wire cutter and need a powrer supply;
> CompUSA is selling an ATX computer supply for $1.99 after rebates
> Starts at $29.99 then instant $7.00 off and $21.00 mail in. I dont
> know how good such a supply is for the purpuse but have read in
> threads that they are used. To work rather well; it would be good to
> have DC outputs of about 12v- 6amp for wing core cutting set ups and
> 5/6v-6amp for fff cutting. I don't know the available outputs on
> these. Some of you computer geeks should know. There are probably a
> lot of free ones laying around if you know where to find them. An AT
> power supply should also work depending on available output V/As.
> Phil
> ___________________________________________________________________________
> You are a member of the lektrik_flyers listserv. You became a member of
> this listserv by either directly subscribing or being recommended for
> subscription by a fellow member. If you no longer wish to be a member of
> this listserv, please follow the link
> (//www.freelists.org/list/lektrik_flyers) and follow the onscreen
> prompts to be removed from this list. Should this not work for you send an
> email to bbeavers57@xxxxxxxxx and supply the email address you wish to have
> removed from the listserv, and this will be done at the earliest available
> opportunity. Visit our website at http://users.tcworks.net/~bbeavers/.
> Thank you and we hope you continue to enjoy being a member of the lektrik
> flyers.
>
> ___________________________________________________________________________
> You are a member of the lektrik_flyers listserv. You became a member of this
> listserv by either directly subscribing or being recommended for subscription
> by a fellow member. If you no longer wish to be a member of this listserv,
> please follow the link (//www.freelists.org/list/lektrik_flyers) and
> follow the onscreen prompts to be removed from this list. Should this not
> work for you send an email to bbeavers57@xxxxxxxxx and supply the email
> address you wish to have removed from the listserv, and this will be done at
> the earliest available opportunity. Visit our website at
> http://users.tcworks.net/~bbeavers/. Thank you and we hope you continue to
> enjoy being a member of the lektrik flyers.
>
___________________________________________________________________________
You are a member of the lektrik_flyers listserv. You became a member of this
listserv by either directly subscribing or being recommended for subscription
by a fellow member. If you no longer wish to be a member of this listserv,
please follow the link (//www.freelists.org/list/lektrik_flyers) and
follow the onscreen prompts to be removed from this list. Should this not work
for you send an email to bbeavers57@xxxxxxxxx and supply the email address you
wish to have removed from the listserv, and this will be done at the earliest
available opportunity. Visit our website at
http://users.tcworks.net/~bbeavers/. Thank you and we hope you continue to
enjoy being a member of the lektrik flyers.
Other related posts:
