[LRflex] Re: Technical, Using Elpros + Cron 50 + Four thirds Camera
- From: Bille Xavier F. <hot_billexf@xxxxxxxxxxx>
- To: <leicareflex@xxxxxxxxxxxxx>
- Date: Sat, 21 Apr 2012 16:49:27 +0200
Thanks for the support Richard In fact, I don't have yet this Elpro. But I have
the other hardware. I have read that the 14-50 Vario Elmarit of the Digilux can
focus down to 29cmm (a little more than a feet) with a rate of reproduction of
1:3.2 I have read (thanks David Young for your article) that the 'Cron 50mm
with Elpro VIb can give a reproduction rate of 1:2.6, er on a film camera,
minimum distance is 14 cm (5 inches). Given the excellent resolution of the
summicron 50 on a Digilux, it's quite tempting. But I have no idea of the
final reproduction rate. And I have no idea on how to compute it.
Experimentation, it gives someting to do on a bad day.
<--->
Xavier F. BILLE
Maisons Alfort - France
> Subject: [LRflex] Re: Technical, Using Elpros + Cron 50 + Four thirds Camera
> From: ilovaussiesheps@xxxxxxxxxxx
> Date: Fri, 20 Apr 2012 11:52:21 -0400
> To: leicareflex@xxxxxxxxxxxxx
>
> Don't know the specific answers to your questions, but don't forget that
> sensor size matters when it comes to depth of field comparisons.
>
> However!
>
> If you already own a 4/3 camera, a summicron fifty, and an elpro or two,
> couldn't you simply slap a ruler on a table, the camera on a tripod, and
> snapoff a series of comparison shots in short order?
>
> Richard
> _____________________________________
>
> My Sarcasm Fu Is Strong,
> Proceed With Caution. :-)
> _____________________________________
>
> On Apr 20, 2012, at 6:04 AM, Bille Xavier F. <hot_billexf@xxxxxxxxxxx> wrote:
>
> > Good day to all
> > The Elpro used on a Cron 50 will offer a magnifying view of say, X, on a
> > film Leica R camera,
> > Question: What happens to the value of X when the same lens is used on a
> > Four Thirds, such as the Digilux 3.
> > The 50mm has an angle of view equivalent to 100mm on the Digilux 3
> > Would this X becomes X*2, twice magnifying ?
> > Then the DOF at f2 must be equivalent to a "poil de cul" (Arse Hair,
> > typical French to say a small or negligeible quantity).
> > Then, which one, the ELPRO 1 or ELPRO 2 (equ. VIa and VIb) is better?
> > Your widsom will certainly help me. Thanks!
> >
> >
> >
> >
> > <--->
> > Xavier F. BILLE
> > Maisons Alfort - France
> >
> >
> > ------
> > Unsubscribe or change to/from Digest Mode at:
> > http://www.lrflex.furnfeather.net/
> > Archives are at:
> > //www.freelists.org/archives/leicareflex/
> ------
> Unsubscribe or change to/from Digest Mode at:
> http://www.lrflex.furnfeather.net/
> Archives are at:
> //www.freelists.org/archives/leicareflex/
------
Unsubscribe or change to/from Digest Mode at:
http://www.lrflex.furnfeather.net/
Archives are at:
//www.freelists.org/archives/leicareflex/
Other related posts:
