[korgypark] Re: bank select problem
- From: Thomas Anderssen <thomas.anderssen@xxxxxxxxxxxx>
- To: korgypark@xxxxxxxxxxxxx
- Date: Fri, 14 Mar 2003 19:11:03 +0200
Hi again Andy...
Good to hear it worked!
At least I''ve got sometrhing right about the Korg... *grin*
cheers, Thomas
At 15:03 14.3.2003 +0000, you wrote:
>Hi Thomas,
>
> > 1. You have to disable the Korg from making bank changes:
> > On page GLOBAL page 02D set the PRG variable to NUM (or PRG, don't remeber
> > which) Then Go back to MULTI and reset to GM (page 23A).
> >
> > 2. OR you have to teach BB how to send the correct Bank Change messages:
> > Bank 0 = A, Bank 7169 = Bank G (If you wish to use sounds from both bank A
> > and G).
>
>Spot on - that fixed it!! :o)
>
>Thanks!
>
>Andy
>
>----------------------------------------------------------------
>This message was sent through the Korgy Park mailing list.
>Mailing list info page: //www.freelists.org/list/korgypark.
----------------------------------------------------------------
This message was sent through the Korgy Park mailing list.
Mailing list info page: //www.freelists.org/list/korgypark.
Other related posts:
