[korgypark] Re: bank select problem
- From: "Andy Ebling" <andyebling@xxxxxxxxxxx>
- To: <korgypark@xxxxxxxxxxxxx>
- Date: Fri, 14 Mar 2003 15:03:22 -0000
Hi Thomas,
> 1. You have to disable the Korg from making bank changes:
> On page GLOBAL page 02D set the PRG variable to NUM (or PRG, don't remeber
> which) Then Go back to MULTI and reset to GM (page 23A).
>
> 2. OR you have to teach BB how to send the correct Bank Change messages:
> Bank 0 = A, Bank 7169 = Bank G (If you wish to use sounds from both bank A
> and G).
Spot on - that fixed it!! :o)
Thanks!
Andy
----------------------------------------------------------------
This message was sent through the Korgy Park mailing list.
Mailing list info page: //www.freelists.org/list/korgypark.
Other related posts:
